{"id":8179,"date":"2026-09-29T04:00:08","date_gmt":"2026-09-29T04:00:08","guid":{"rendered":"https:\/\/www.compressorpartsmall.com\/?post_type=product&p=8179"},"modified":"2026-09-29T05:06:28","modified_gmt":"2026-09-29T05:06:28","slug":"atlas-copco-ga-132-pack-ff","status":"publish","type":"product","link":"https:\/\/www.compressorpartsmall.com\/es\/product\/atlas-copco-ga-132-pack-ff\/","title":{"rendered":"Compresor de aire de tornillo rotativo con inyecci\u00f3n de aceite Atlas Copco GA 132 (Pack FF)"},"content":{"rendered":"
The Atlas Copco GA 132 is the fixed speed model in the middle of the GA 90+-160 oil-injected platform. It pairs a SmartInjection compression element with an oil-cooled motor of IE4 class, and no model in its class carries a wider choice of pressure bands: four versions at 50 Hz and four at 60 Hz, from a 5.5 bar low pressure network up to a 10 bar \/ 150 psi plant line. The Full Feature branch adds an integrated refrigerant dryer to the same package.<\/p>\n
Where the GA 132 Sits in the Oil-Injected Range<\/h2>\n
The GA 90+-160 platform forms the upper end of the oil-injected screw range, and the GA 132 works in the middle of it. Thousands of GA compressors run around the world in this duty class, and the installations concentrate where compressed air works around the clock: general industry, mining, power plants, metal plants and cement works. The jobs range from pneumatic tools, actuators and valves to ventilation, packing and palletizing machinery, soot blowing, fly ash handling and the pneumatic conveying of raw materials.<\/p>\n
Two cooling layouts share the same platform. The air-cooled package releases the compression heat into the ambient air through its cooler section, while the water-cooled package connects to a cooling-water loop on site. The rated figures of the GA 132 apply across both layouts, so the choice comes down to the infrastructure the plant already has.<\/p>\n
Qu\u00e9 abarcan los nombres \u00abPack\u00bb y \u00abFF\u00bb<\/h3>\n
Two names describe the scope of the GA 132, and each adds one fact:<\/p>\n
\n
Paquete \u2014 el paquete est\u00e1ndar: el compresor con sus refrigeradores, accionamientos y sistemas de control, listo para una planta que seca el aire mediante equipos independientes.<\/li>\n
FF \u2014 Funcionalidad completa: el paquete incluye un secador de refrigerante, por lo que el secado se realiza dentro del compresor en lugar de junto a \u00e9l, sin necesidad de trabajos adicionales de instalaci\u00f3n de cables ni tuber\u00edas.<\/li>\n<\/ul>\n
The GA 132 is built as the GA 132 – 5.5 bar, – 7.5 bar, – 8.5 bar and – 10 bar versions at 50 Hz, and as the GA 132 – 75 psi, – 100 psi, – 125 psi and – 150 psi versions at 60 Hz. Every version combines with both scopes, so a plant picks the pressure band first and the depth of air treatment second.<\/p>\n
Atlas Copco GA 132 (1)<\/figcaption><\/figure>\n
Technical Specifications of the GA 132<\/h2>\n
The table below condenses the GA 132 into its headline figures:<\/p>\n
\n\n
\n
Par\u00e1metro<\/th>\n
Valor<\/th>\n<\/tr>\n
\n
Modelo<\/td>\n
Atlas Copco GA 132<\/td>\n<\/tr>\n
\n
Tipo de compresor<\/td>\n
Tornillo rotativo con lubricaci\u00f3n por aceite, refrigerado por aire o por agua<\/td>\n<\/tr>\n
\n
Control de capacidad<\/td>\n
Velocidad fija, carga\/descarga<\/td>\n<\/tr>\n
\n
Potencia del motor instalado<\/td>\n
132 hp (50 Hz) \/ 175 hp (60 Hz)<\/td>\n<\/tr>\n
\n
Versiones de presi\u00f3n<\/td>\n
GA 132 – 5.5 bar, – 7.5 bar, – 8.5 bar and – 10 bar (50 Hz); – 75 psi, – 100 psi, – 125 psi and – 150 psi (60 Hz)<\/td>\n<\/tr>\n
\n
Presi\u00f3n de trabajo<\/td>\n
5,5-10,9 bar(e) \/ 80-158 psig, seg\u00fan la versi\u00f3n<\/td>\n<\/tr>\n
\n
Entrega gratuita por v\u00eda a\u00e9rea<\/td>\n
354-505 l\/s by version (21.2-30.3 m\u00b3\/min \/ 750-1,070 cfm)<\/td>\n<\/tr>\n
\n
Nivel sonoro<\/td>\n
77-78 dB(A) en el puesto de trabajo<\/td>\n<\/tr>\n
\n
Punto de roc\u00edo, todas las funciones<\/td>\n
3 \u00b0C \/ 37 \u00b0F en condiciones de referencia del secador<\/td>\n<\/tr>\n
\n
Frecuencia<\/td>\n
50 Hz y 60 Hz<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Datos nominales a 50 Hz<\/h3>\n
Each 50 Hz version of the GA 132 is listed at one rated point with its FAD measured at the corresponding reference working pressure: 5 bar for the 5.5 bar version, 7 bar for the 7.5 bar version, 8 bar for the 8.5 bar version and 9.5 bar for the 10 bar version:<\/p>\n
\n\n
\n
Modelo<\/th>\n
Presi\u00f3n m\u00e1xima de trabajo<\/th>\n
Referencia FAD<\/th>\n
FAD (l\/s)<\/th>\n
FAD (m\u00b3\/min)<\/th>\n
FAD (cfm)<\/th>\n
Ruido<\/th>\n<\/tr>\n
\n
GA 132 – 5.5 bar<\/td>\n
5,5 bar(e) \/ 80 psig<\/td>\n
5,3 bar(e) \/ 77 psig<\/td>\n
502<\/td>\n
30.1<\/td>\n
1,064<\/td>\n
78 dB(A)<\/td>\n<\/tr>\n
\n
GA 132 – 7.5 bar<\/td>\n
7,5 bar(e) \/ 109 psig<\/td>\n
7,3 bar(e) \/ 106 psig<\/td>\n
440<\/td>\n
26.4<\/td>\n
932<\/td>\n
78 dB(A)<\/td>\n<\/tr>\n
\n
GA 132 – 8.5 bar<\/td>\n
8,5 bar(e) \/ 123 psig<\/td>\n
8,3 bar(e) \/ 120 psig<\/td>\n
414<\/td>\n
24.8<\/td>\n
877<\/td>\n
78 dB(A)<\/td>\n<\/tr>\n
\n
GA 132 – 10 bar<\/td>\n
10 bar(e) \/ 145 psig<\/td>\n
9,8 bar(e) \/ 142 psig<\/td>\n
382<\/td>\n
22.9<\/td>\n
809<\/td>\n
78 dB(A)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
The installed motor power stays at 132 hp across all four versions, and the sound level holds at 78 dB(A) at the work station. The 5.5 bar version delivers the highest flow at 502 l\/s (1,064 cfm), and moving up the pressure ladder to the 10 bar version trims the flow to 382 l\/s (809 cfm). That spread across four bands lets a plant match the compressor to its real network pressure instead of over-pressurizing the whole system for one consumer.<\/p>\n
Datos nominales a 60 Hz<\/h3>\n
The 60 Hz versions keep the four-version structure, with the pressure bands written in psi and the motor rated at 175 hp. FAD is measured at 73 psi for the 75 psi version and at the version pressure for the 100, 125 and 150 psi versions:<\/p>\n
\n\n
\n
Modelo<\/th>\n
Presi\u00f3n m\u00e1xima de trabajo<\/th>\n
Referencia FAD<\/th>\n
FAD (l\/s)<\/th>\n
FAD (m\u00b3\/min)<\/th>\n
FAD (cfm)<\/th>\n
Ruido<\/th>\n<\/tr>\n
\n
GA 132 – 75 psi<\/td>\n
5,5 bar(e) \/ 80 psig<\/td>\n
5,3 bar(e) \/ 77 psig<\/td>\n
505<\/td>\n
30.3<\/td>\n
1,070<\/td>\n
77 dB(A)<\/td>\n<\/tr>\n
\n
GA 132 – 100 psi<\/td>\n
7,4 bar(e) \/ 107 psig<\/td>\n
7,2 bar(e) \/ 104 psig<\/td>\n
446<\/td>\n
26.8<\/td>\n
945<\/td>\n
77 dB(A)<\/td>\n<\/tr>\n
\n
GA 132 – 125 psi<\/td>\n
9,1 bar(e) \/ 132 psig<\/td>\n
8,9 bar(e) \/ 129 psig<\/td>\n
400<\/td>\n
24.0<\/td>\n
848<\/td>\n
77 dB(A)<\/td>\n<\/tr>\n
\n
GA 132 – 150 psi<\/td>\n
10,9 bar(e) \/ 158 psig<\/td>\n
10,7 bar(e) \/ 155 psig<\/td>\n
354<\/td>\n
21.2<\/td>\n
750<\/td>\n
77 dB(A)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
The 75 psi version peaks at 505 l\/s (1,070 cfm), and the 150 psi version delivers 354 l\/s (750 cfm). At 60 Hz reference conditions, the pressure dew point of the integrated refrigerant dryer sits between 2\u00b0C and 3\u00b0C (36\u00b0F to 37\u00b0F).<\/p>\n
Dimensiones y peso<\/h3>\n
The footprint of the GA 132 depends on the branch, and the integrated dryer of the Full Feature adds length to the package:<\/p>\n
El paquete \u00abFull Feature\u00bb es 400 mm m\u00e1s largo que el \u00abPack\u00bb, ya que el m\u00f3dulo del secador de refrigerante se aloja dentro de la misma cubierta. La anchura y la altura son las mismas en ambos casos, 1.785 mm y 2.020 mm, por lo que la distribuci\u00f3n del espacio se reduce a la diferencia de longitud entre las dos versiones.<\/p>\nAtlas Copco GA 132 (2)<\/figcaption><\/figure>\n
El tren de transmisi\u00f3n del \u00abFixed Speed Pack\u00bb<\/h2>\n
El paquete de velocidad fija se centra en realizar una \u00fanica tarea sin desviaciones. SmartInjection dosifica la cantidad exacta de aceite que necesita el elemento de compresi\u00f3n, de modo que este funcione con la m\u00e1xima eficiencia en todas las condiciones de funcionamiento, mientras que un flujo de aceite independiente alimenta los cojinetes para prolongar su vida \u00fatil y aumentar el tiempo de actividad. El motor es una unidad refrigerada por aceite de clase IE4 que no requiere intervenciones de mantenimiento, y el circuito de aceite que lo refrigera forma parte del mismo circuito que acondiciona el elemento.<\/p>\n
Protecci\u00f3n IP66 y resistencia a las condiciones ambientales<\/h3>\n
The drive train of the GA 132 is IP66 rated, which seals it completely against environmental dust and moisture. That rating is what lets the compressor run reliably in the toughest conditions: cement dust, mine particulates and humid intake air stay outside the drive train. The package operates at ambient temperatures up to 55\u00b0C \/ 131\u00b0F, and the high ambient variant extends the fixed speed pack to 55\u00b0C for continuous duty in hot and humid climates.<\/p>\n
Art\u00edculo completo: El secador de refrigerante integrado<\/h2>\n
In the GA 132 Full Feature, the refrigeration dryer is fully integrated in the compressor unit. The all-in-one layout reduces the floor space needed for the compressor room and removes the piping installation work a standalone dryer requires. The typical pressure dew point of the refrigerant dryer is 3\u00b0C (37.4\u00b0F) at reference conditions, and the dew point is continuously monitored while the machine runs.<\/p>\n
Control del ciclo de ahorro y separaci\u00f3n de aceite<\/h3>\n
El exclusivo y patentado sistema \u00abSave Cycle Control\u00bb detiene la secadora cada vez que el compresor se detiene o se encuentra en modo de descarga, lo que reduce el consumo energ\u00e9tico del sistema de tratamiento de aire. En cuanto al sistema de aceite, el separador utiliza varios cartuchos m\u00e1s peque\u00f1os en lugar de un \u00fanico tambor grande, lo que simplifica y acorta las tareas de mantenimiento y minimiza el arrastre de aceite hacia la corriente de aire.<\/p>\nAtlas Copco GA 132 (3)<\/figcaption><\/figure>\n
Supervisi\u00f3n y control<\/h2>\n
The Elektronikon Touch controller runs the GA 132 and keeps the pressure band where the plant needs it. The controller manages the load and unload pattern of the fixed speed machine, watches the operating temperatures, and stores the service counters that decide the next intervention. Over the ethernet connection, SMARTLINK adds remote monitoring of the machine state, and Optimizer 4.0 coordinates the GA 132 when it works alongside other compressors in a larger room.<\/p>\n
Opciones que ampl\u00edan el paquete<\/h3>\n
\n
Variante para temperaturas ambientales elevadas: funcionamiento continuo y fiable en climas c\u00e1lidos y h\u00famedos, hasta 55 \u00b0C \/ 131 \u00b0F.<\/li>\n
Medici\u00f3n de pulsos de choque: supervisi\u00f3n continua mediante SPM del elemento compresor y los cojinetes del motor, con niveles de alarma y parada programados durante la puesta en marcha, de modo que la revisi\u00f3n se realice cuando el estado de los cojinetes lo requiera.<\/li>\n
Protecci\u00f3n t\u00e9rmica del motor: cinco sensores de temperatura PT-1000 en el motor principal, dos en los cojinetes y tres en los devanados, cuyos datos se muestran en el Elektronikon con alarmas y paradas programadas para proteger el motor.<\/li>\n
Aceite apto para uso alimentario: la opci\u00f3n de aceite Roto-Foodgrade para plantas de envasado, farmac\u00e9uticas y de alimentaci\u00f3n y bebidas, en las que se permite el contacto ocasional dentro y en las inmediaciones de las zonas de procesamiento de alimentos.<\/li>\n
Prueba de presencia y de rendimiento: visita a la f\u00e1brica y presencia en la prueba de rendimiento est\u00e1ndar, de conformidad con la norma ISO 1217:2009, anexos C y E (4.\u00aa edici\u00f3n).<\/li>\n<\/ul>\nAtlas Copco GA 132 (4)<\/figcaption><\/figure>\n
Applications of the GA 132<\/h2>\n
The four pressure bands shape the application map of the GA 132. The 5.5 bar and 75 psi versions feed low pressure networks where high pressure would only waste energy, and the 7.5 to 10 bar and 100 to 150 psi versions carry general plant air, pneumatic tools, actuators and process consumers on a single machine.<\/p>\n
General industry runs the GA 132 for packing, palletizing and the daily workload of a production hall. Metal plants use it for instrumentation, plant air and the pneumatic conveying of raw materials or ash, power plants keep a continuous supply for soot blowing and fly ash handling, and mining and cement operations value the IP66 drive train and the grouped service area where dust and moisture push ordinary machines to their limits.<\/p>\n
Service and Support Around the GA 132<\/h2>\n
Las piezas de recambio est\u00e1n agrupadas para facilitar el acceso; todos los componentes est\u00e1n dise\u00f1ados para facilitar su mantenimiento, y el dise\u00f1o patentado en forma de p\u00f3rtico permite un acceso completo a cada componente cuando se requiere un mayor acceso. Cada componente est\u00e1 dise\u00f1ado para reducir a la mitad el tiempo de mantenimiento en comparaci\u00f3n con los dise\u00f1os tradicionales, lo que mantiene un alto nivel de disponibilidad a lo largo de la vida \u00fatil de la m\u00e1quina. Los planes de mantenimiento opcionales cubren las reparaciones, el mantenimiento preventivo y las piezas de recambio, y los fluidos y lubricantes de Atlas Copco est\u00e1n adaptados al equipo con aditivos antioxidantes y antiespumantes.<\/p>\n
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/09\/Atlas-Copco-GA-132-1-300x225.webp\")
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/09\/Atlas-Copco-GA-132-2-300x225.webp\")
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/09\/Atlas-Copco-GA-132-3-300x225.webp\")
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/09\/Atlas-Copco-GA-132-4-300x225.webp\")
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/09\/Atlas-Copco-GA-132-5-300x225.webp\")