The GA 315 is built as the GA 315 – 7.5 bar, – 8.5 bar and – 10 bar versions at 50 Hz, and as the GA 315 – 100 psi, – 125 psi and – 150 psi versions at 60 Hz. Every version combines with both the Pack and the Full Feature scope, so a plant picks the pressure band first and the depth of air treatment second.<\/p>\n The table below condenses the GA 315 into its headline figures:<\/p>\n Cada versi\u00f3n de 50 Hz ofrece un caudal nominal a su presi\u00f3n de trabajo m\u00e1xima. El caudal nominal (FAD) de la versi\u00f3n est\u00e1ndar se mide a la presi\u00f3n de trabajo m\u00e1xima, mientras que la versi\u00f3n con todas las prestaciones incorpora un secador integrado con una ca\u00edda de presi\u00f3n reducida:<\/p>\n The installed motor power stays at 320 kW across all versions. The 7.5 bar version tops the range at 1,036 l\/s, and moving to the 10 bar band trades flow for pressure at 911 l\/s (1,930 cfm). In the Full Feature build the working pressure reads 8.3 bar(e) \/ 120 psig on the 8.5 bar version and 9.8 bar(e) \/ 142 psig on the 10 bar version, which reflects the pressure drop of the integrated dryer.<\/p>\n The 60 Hz versions cover three bands from 100 to 150 psi, with the motor rated at 430 hp:<\/p>\n The 100 psi version peaks at 1,043 l\/s (2,210 cfm), the largest flow figure in the whole platform. FAD is measured according to ISO 1217, Annex C, edition 4 (2009), at an absolute inlet pressure of 1 bar and an intake temperature of 20 degrees Celsius.<\/p>\n The footprint of the GA 315 depends on the branch, and the integrated dryer of the Full Feature adds length to the package:<\/p>\n The water-cooled packages share the width and height with 3,130 mm length for the Pack and 3,760 mm for the Full Feature, because the dryer module replaces part of the cooler section. The Full Feature package is 630 mm longer and 600 kg heavier than the air-cooled Pack, so floor planning comes down to the length difference between the two branches.<\/p>\n SmartInjection es la tecnolog\u00eda que constituye el n\u00facleo del elemento. Proporciona la cantidad exacta de aceite que necesita el elemento de compresi\u00f3n, de modo que este funciona con la m\u00e1xima eficiencia en condiciones variables, en lugar de hacerlo con un rendimiento fijo y mediocr. El aceite fluye por separado hacia los cojinetes, lo que prolonga su vida \u00fatil y aumenta el tiempo de actividad, y el propio motor est\u00e1 refrigerado por aceite, lo que elimina las intervenciones de mantenimiento que requiere un motor convencional refrigerado por aire. El tren de transmisi\u00f3n incorpora un motor IE4, la clase de eficiencia que Atlas Copco aplica a las m\u00e1quinas de velocidad fija de esta plataforma.<\/p>\n The drive train of the GA 315 is IP66 rated, which seals it completely against environmental dust and moisture. That rating is what lets the compressor run reliably in the toughest conditions: cement dust, mine particulates and humid intake air stay outside the drive train. The fixed-speed pack operates at ambient temperatures up to 55 degrees Celsius, and the high ambient variant is available for hotter climates.<\/p>\n Over 80 percent of a compressor lifecycle cost is the energy it consumes, and compressed air generation can account for more than 40 percent of a plant’s electricity bill. The GA 315 attacks that share at the element and the motor: SmartInjection holds the element at peak efficiency, generous cooling capacity and low internal pressure drops keep the losses down, and the Elektronikon Touch control trims the energy use of the whole package.<\/p>\n Con el controlador Elektronikon, una instalaci\u00f3n alterna entre dos puntos de consigna de forma manual o autom\u00e1tica para optimizar el consumo energ\u00e9tico en los momentos de menor demanda. El sofisticado algoritmo pone en marcha el motor de accionamiento solo cuando es necesario y, dado que se mantiene el punto de consigna deseado al tiempo que se minimiza el tiempo de funcionamiento, el consumo energ\u00e9tico de la m\u00e1quina de carga base se mantiene en el nivel previsto en su dise\u00f1o.<\/p>\n The optional energy recovery system consists of a built-in stainless steel heat exchanger with a thermostatic controlled circuit. It recovers up to 78 percent of the energy from the integrated motor and element oil circuit in the form of warm water or hot water, without any adverse influence on compressor performance. At 320 kW of installed power, the recoverable share is large enough to feed boiler preheating, washing processes or space heating across a whole plant section.<\/p>\n In the GA 315 Full Feature, the refrigeration dryer is fully integrated in the compressor unit. The all-in-one layout reduces the floor space needed for the compressor room and removes the piping installation work a standalone dryer requires. The pressure dew point of the refrigerant dryer is 3 degrees Celsius at dryer reference conditions, and the dew point is continuously monitored while the machine runs.<\/p>\n En lo que respecta al aceite, el nuevo dep\u00f3sito separador utiliza varios cartuchos m\u00e1s peque\u00f1os en lugar de un \u00fanico tambor grande, lo que simplifica y acorta las tareas de mantenimiento y minimiza el arrastre de aceite hacia la corriente de aire. Adem\u00e1s, el uso de varios cartuchos m\u00e1s peque\u00f1os reduce la ca\u00edda de presi\u00f3n a trav\u00e9s del separador, por lo que el conjunto mantiene una mayor parte de su caudal en la salida.<\/p>\n The Elektronikon Touch controller runs the GA 315 from one touch display. The controller monitors the running conditions and the maintenance status, and the built-in remote control and notification functions come with a simple integrated webpage as standard. Support covers a wide set of languages, so the same machine serves plants across regions without a local controller variant.<\/p>\n SMARTLINK supervisa la instalaci\u00f3n de aire comprimido a trav\u00e9s de la red Ethernet: los informes personalizados permiten realizar un seguimiento de la eficiencia energ\u00e9tica de la sala de compresores, los componentes se sustituyen a tiempo para mantener un alto nivel de disponibilidad y las alertas tempranas evitan aver\u00edas y p\u00e9rdidas de producci\u00f3n.<\/p>\n Las instalaciones con varias m\u00e1quinas incorporan Optimizer 4.0. Este sistema pone en marcha y detiene los compresores para minimizar el exceso de presi\u00f3n, establece m\u00faltiples rangos de presi\u00f3n para distintas circunstancias \u2014como las horas no productivas\u2014 y ajusta autom\u00e1ticamente la presi\u00f3n del sistema para compensar las ca\u00eddas de presi\u00f3n provocadas por los filtros, las tuber\u00edas y los secadores. Reducir la presi\u00f3n de funcionamiento en 1 bar disminuye el consumo de energ\u00eda en un 7 % y las fugas de aire en un 13 %.<\/p>\n Mining operations run the GA 315 for dust bag filtration, service air, ventilation air and pneumatic tools, where reliability and robustness decide the shift plan. Power plants keep a continuous supply of compressed air for soot blowing and fly ash handling, and metal plants use it for instrumentation, plant air and the pneumatic conveying of raw materials or ash.<\/p>\n![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/10\/Atlas-Copco-GA-315-FF-1-300x300.webp\")
Technical Specifications of the GA 315<\/h2>\n
\n\n
\n Par\u00e1metro<\/th>\n Valor<\/th>\n<\/tr>\n \n Modelo<\/td>\n Atlas Copco GA 315<\/td>\n<\/tr>\n \n Tipo de compresor<\/td>\n Tornillo rotativo con lubricaci\u00f3n por aceite, refrigerado por aire o por agua<\/td>\n<\/tr>\n \n Control de capacidad<\/td>\n Velocidad fija<\/td>\n<\/tr>\n \n Potencia del motor instalado<\/td>\n 320 kW \/ 430 hp<\/td>\n<\/tr>\n \n Versiones de presi\u00f3n<\/td>\n 7.5 \/ 8.5 \/ 10 bar (50 Hz); 100 \/ 125 \/ 150 psi (60 Hz)<\/td>\n<\/tr>\n \n Presi\u00f3n de trabajo<\/td>\n 7.4-10.9 bar(e) \/ 107-158 psig by version<\/td>\n<\/tr>\n \n Entrega gratuita por v\u00eda a\u00e9rea<\/td>\n 873-1,043 l\/s by version (52.4-62.6 m\u00b3\/min \/ 1,850-2,210 cfm)<\/td>\n<\/tr>\n \n Nivel sonoro<\/td>\n 70-76 dB(A) at the work station by version<\/td>\n<\/tr>\n \n Punto de roc\u00edo, todas las funciones<\/td>\n 3 \u00b0C \/ 37 \u00b0F en condiciones de referencia del secador<\/td>\n<\/tr>\n \n Frecuencia<\/td>\n 50 Hz y 60 Hz<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Datos nominales a 50 Hz<\/h3>\n
\n\n
\n Versi\u00f3n<\/th>\n Presi\u00f3n de trabajo<\/th>\n FAD (l\/s)<\/th>\n FAD (m\u00b3\/min)<\/th>\n FAD (cfm)<\/th>\n Ruido<\/th>\n<\/tr>\n \n GA 315 – 7.5 bar<\/td>\n 7,5 bar(e) \/ 109 psig<\/td>\n 1,036<\/td>\n 62.2<\/td>\n 2,072<\/td>\n 73 dB(A)<\/td>\n<\/tr>\n \n GA 315 – 8.5 bar<\/td>\n 8,5 bar(e) \/ 123 psig<\/td>\n 978<\/td>\n 58.7<\/td>\n 2,072<\/td>\n 73 dB(A)<\/td>\n<\/tr>\n \n GA 315 – 10 bar<\/td>\n 10 bar(e) \/ 145 psig<\/td>\n 911<\/td>\n 54.7<\/td>\n 1,930<\/td>\n 70 dB(A)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Datos nominales a 60 Hz<\/h3>\n
\n\n
\n Versi\u00f3n<\/th>\n Presi\u00f3n de trabajo<\/th>\n FAD (l\/s)<\/th>\n FAD (m\u00b3\/min)<\/th>\n FAD (cfm)<\/th>\n Ruido<\/th>\n<\/tr>\n \n GA 315 – 100 psi<\/td>\n 7,4 bar(e) \/ 107 psig<\/td>\n 1,043<\/td>\n 62.6<\/td>\n 2,210<\/td>\n 76 dB(A)<\/td>\n<\/tr>\n \n GA 315 – 125 psi<\/td>\n 9,1 bar(e) \/ 132 psig<\/td>\n 950<\/td>\n 57.0<\/td>\n 2,013<\/td>\n 76 dB(A)<\/td>\n<\/tr>\n \n GA 315 – 150 psi<\/td>\n 10,9 bar(e) \/ 158 psig<\/td>\n 873<\/td>\n 52.4<\/td>\n 1,850<\/td>\n 76 dB(A)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Dimensiones y peso<\/h3>\n
\n\n
\n Sucursal<\/th>\n Peso<\/th>\n Dimensiones (largo \u00d7 ancho \u00d7 alto)<\/th>\n<\/tr>\n \n GA 315, Pack, air-cooled<\/td>\n 6,200 kg \/ 13,669 lb<\/td>\n 4.390 \u00d7 2.090 \u00d7 2.020 mm (173 \u00d7 82 \u00d7 79 pulgadas)<\/td>\n<\/tr>\n \n GA 315, Full Feature, air-cooled<\/td>\n 6,800 kg \/ 14,991 lb<\/td>\n 5.020 \u00d7 2.090 \u00d7 2.020 mm (198 \u00d7 82 \u00d7 79 pulgadas)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n SmartInjection y el tren de transmisi\u00f3n refrigerado por aceite<\/h2>\n
Protecci\u00f3n IP66 y resistencia a las condiciones ambientales<\/h3>\n
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/10\/Atlas-Copco-GA-315-FF-2-300x300.webp\")
Eficiencia y recuperaci\u00f3n de calor<\/h2>\n
Control de doble punto de consigna<\/h3>\n
Recuperaci\u00f3n de energ\u00eda en forma de agua caliente<\/h3>\n
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/10\/Atlas-Copco-GA-315-FF-3-300x300.webp\")
Art\u00edculo completo: El secador de refrigerante integrado<\/h2>\n
Separaci\u00f3n de aceite y calidad del aire<\/h3>\n
Supervisi\u00f3n y control<\/h2>\n
SMARTLINK y Optimizer 4.0<\/h3>\n
Opciones que ampl\u00edan el paquete<\/h3>\n
\n
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/10\/Atlas-Copco-GA-315-1-300x300.webp\")
Applications of the GA 315<\/h2>\n
![\"Atlas](\"https:\/\/www.compressorpartsmall.com\/wp-content\/uploads\/2026\/10\/Atlas-Copco-GA-315-2-300x300.webp\")