Перейти к основному содержанию

Atlas Copco 1900520440 Elektronikon MK5S Upgrade Controller

(1 отзыв клиента)

$1,300.00

Atlas Copco 1900520440 is the Elektronikon MK5S upgrade controller used to bring current control functions to compressors already in service. The official upgrade literature presents the Mk5 platform as a route to modern pressure control, service planning and connectivity on working machines. Supplied by Seadweer as a genuine Atlas Copco part, it is recorded under the index form 1900-5204-40. Order routing depends on the control setup of the machine, and the record names two alternative order numbers for different SmartboxPro configurations. Send us the model and serial number from your compressor nameplate and our parts desk will confirm the match and prepare your quotation.

Запрос

Сведения о продукте

Дифференцированная цена

  • 1–9 шт.$1,500.00
  • ≥10 шт.$1,300.00

Технические характеристики

  • Страна происхожденияRO
  • Срок доставки7–14 рабочих дней
  • Минимальный объем заказа1 штука
  • УпаковкаДеревянный футляр
  • Качество продукцииСовершенно новый, оригинальный
  • Режим транзакцийCIF, DAP, EXW, FOB
  • Код HS8414900090
Артикул: 10174 Категория: Метка: Бренд:

Описание

A control upgrade is a way of giving a working compressor the behaviour of a newer machine without replacing the machine itself. Atlas Copco 1900520440 is the Elektronikon MK5S controller supplied for that purpose. It is listed on the official upgrade material under the name Elektronikon Mk5, and the parts record carries the same number in the indexed form 1900-5204-40. Both forms appear on the part label and identify the same controller.

This page sets out what the controller is recorded as, what the Mk5 platform brings to an upgrade, how the official order routing works, and how a match is confirmed against a specific machine. Seadweer supplies 1900520440 as a genuine Atlas Copco part and checks each enquiry against the compressor record before confirming it.

Product Overview

The shop record names 1900520440 as Elektronikon MK5S for upgrades controls, and the ERP description shortens this to Elektronikon MK5S. The wording is consistent across both records: 1900520440 is a controller for an upgrade, not a panel or a cabinet supplied with a new machine. The controller is the unit that is fitted when an older control arrangement is brought up to date.

Official upgrade material for the Mk5 states that the controller combines PLC control technology with Atlas Copco compressor control software. Seadweer supplies 1900520440 for the upgrade route recorded in the parts system, with the match confirmed from the compressor serial number rather than from the machine name alone.

Atlas Copco Elektronikon MK5S 1900520440 (1)
Atlas Copco Elektronikon MK5S 1900520440 (1)

Технические характеристики

The figures below are taken from the official records for 1900520440. They are the values used to identify the part and to plan the panel space and handling of the unit.

Параметр Значение
Service part number 1900520440
Parts index form 1900-5204-40
Recorded name ELEKTRONIKON MK5S
Official upgrade name Elektronikon MK5S for upgrades controls
Item net weight 907.184 g (0.907 kg)
Item dimensions (L x W x H) 274 x 198 x 81 mm
Reference price 1,529.49 EUR
Страна происхождения RO (Romania)
Категория Контроллер

The stated dimensions are the length, width and height of the controller body in that order. The label on the unit supplied as 1900520440 repeats the service number 1900520440 and the index form 1900-5204-40 together, so the two identifiers can be checked against each other on receipt.

Role in a Control Upgrade

The official upgrade note for the Elektronikon Mk5 makes the purpose of this class of controller clear. It is intended for a compressor of almost any age or type that is still in service, and it brings newer control algorithms and functions to that machine. The documented benefits sit in three areas: user interface, reliability and uptime, and energy use through improved control.

For 1900520440, this means the controller is bought when the existing control on a machine is being renewed or brought up to date. It is not a component associated with a particular production batch of compressors, and it is not tied to one machine generation in the way a panel built for a new unit would be. The upgrade role is what defines the part.

The same note describes the upgrade as an alternative to repairing or replacing an older control system. That framing explains why the controller is ordered on its own: the rest of the machine stays in place, and the control function is renewed around it.

Atlas Copco Elektronikon MK5S 1900520440 (2)
Atlas Copco Elektronikon MK5S 1900520440 (2)

Platform Functions and Connections

The Mk5 platform carries control functions that are relevant to an upgrade. The official material lists narrow pressure control, a dual pressure setpoint, pre-warning indication, remote control and automatic restart after a voltage failure. It also lists a dryer saver cycle, a delay on the second stop, a day and week organiser, a graphic service plan indicator and real-time trending. Connectivity and multi-compressor control are described as available options on the platform.

These are functions of the Mk5 control platform, described here to explain what an upgrade to 1900520440 is intended to deliver. They are not separate parts supplied in the box. The item ordered under 1900520440 is the hardware controller, and the functions become part of the machine once 1900520440 is fitted and configured within the installation.

The rear of the unit carries labelled connection blocks and a row of plug-in terminals. The label area records the part number and serial number, and the panel carries the usual regulatory marks for a controller of this kind. Connection detail and voltage settings are read from the wiring documentation for the machine being upgraded, since the same controller can be configured differently across installations.

Atlas Copco Elektronikon MK5S 1900520440 (3)
Atlas Copco Elektronikon MK5S 1900520440 (3)

Ordering by SmartboxPro Configuration

The ERP record for 1900520440 includes an ordering note that matters at the point of purchase. The note separates machines by their SmartboxPro configuration and directs the order to a different number in each case. This is a routing instruction recorded by Atlas Copco for 1900520440, and it is applied before the order is placed rather than after.

Where SmartboxPro is installed, the record directs orders to 1900520410. Where SmartboxPro Global is not installed, the record directs orders to 1837068421. The two numbers are recorded for those specific configurations, and each one belongs to the same control upgrade context as 1900520440.

Seadweer applies this routing as part of the match check. Sending the machine model and serial number allows the parts desk to read the control configuration from the machine record and confirm which route applies, so the controller that arrives is the one the installation calls for. The note is included here because it changes the order number, not because it changes the controller itself.

Fitment Verification

The recorded applications for this controller include ZR 55, ZT 55 VSD and GA 132 machines. These are the machines listed in the material supplied for 1900520440. An upgrade controller is selected against the control arrangement on a particular machine, so the machine name is a starting point rather than the final check.

The reliable confirmation path runs through the parts list of the machine, keyed to the serial number on its nameplate. That list ties the controller to the control position of the specific configuration, which is what separates an upgrade unit from a panel supplied with a new machine. Seadweer checks that record against the order before confirming the match for 1900520440.

The SmartboxPro routing described above is part of the same check. A machine that falls into one configuration follows a different order number from one that falls into the other, and both outcomes are read from the machine record rather than assumed from the model designation.

Atlas Copco Elektronikon MK5S 1900520440 (4)
Atlas Copco Elektronikon MK5S 1900520440 (4)

Installation and Service Planning

The controller is a self-contained unit with a defined footprint. At 274 by 198 by 81 mm it is handled as a single panel-mounted component, and the existing panel opening and connector positions are the reference points for the exchange. The unit is fitted with the machine isolated, and the connection work follows the wiring documentation for the installation being upgraded.

Before the old control is removed, record its configuration and keep the machine serial number and the controller number together in the service file. For 1900520440, that record should also note which SmartboxPro configuration applies, so a later enquiry starts from the same confirmed route. This is the detail that makes a subsequent order a confirmed one rather than a fresh investigation.

On receipt, check the part number and the index form against the label and keep the unit in its protective packing until it is ready to be fitted. The connector area should stay clean and free of grit so that the plug-in terminals seat properly. Once the controller is in place, the machine goes through its normal start-up checks as part of the upgrade work.

Часто задаваемые вопросы

What is 1900520440 used for?

It is the Elektronikon MK5S controller supplied for control upgrades on compressors already in service. It replaces the older control function while the rest of the machine stays in place.

What is the difference between 1900520440 and 1900-5204-40?

They are the same controller written in two forms. The first is the service part number and the second is the indexed form printed on the parts label.

Why do other order numbers appear for this controller?

The ERP record directs orders to 1900520410 when SmartboxPro is installed, and to 1837068421 when SmartboxPro Global is not installed. The applicable route is read from the machine record.

Which machines is this controller recorded for?

The supplied applications include ZR 55, ZT 55 VSD and GA 132 machines. Fitment is confirmed through the parts list keyed to the compressor serial number.

Does the upgrade controller come with the control functions enabled?

1900520440 is the controller hardware. The Mk5 functions are configured within the installation, and connection settings are taken from the wiring documentation for the machine being upgraded.

What should I send when requesting a quotation?

Send the compressor model, the serial number from the nameplate and the quantity. The parts desk confirms the match and the applicable order route for 1900520440 before preparing the quotation.

Atlas Copco Elektronikon MK5S 1900520440 (5)
Atlas Copco Elektronikon MK5S 1900520440 (5)

Genuine Atlas Copco Supply from Seadweer

Seadweer supplies 1900520440 as a genuine Atlas Copco controller, sourced through the official parts channel and identified by the part number and index form on the label. Every order is checked against the machine record before it is confirmed, which includes the SmartboxPro order routing where it applies.

Send us the model and serial number from your compressor nameplate and our parts desk will confirm the match and prepare your quotation. Keeping the model, serial number and controller number together in the machine file makes the next enquiry start from a confirmed part.

More Controllers Available on Request

Further Atlas Copco controllers can be supplied on request. Have a look at the table below, or get in touch with us for more information.

Номер детали Название детали Артикул
1089927466 CONTROLLER 1089-9274-66
1089937008 CONTROLLER 1089-9370-08
1089937009 CONTROLLER 1089-9370-09
1089954307 CAN ETHERNET GATEWAY IXXAT 1089-9543-07
1089954766 CONTROLLER 1089-9547-66
1089956102 CONTROLLER 1089-9561-02
1089956180 QC1001 CONTROLLER 1089-9561-80
1089956182 QC1001 CONTROLLER 1089-9561-82
1089956183 QC1001 CONTROLLER 1089-9561-83
1091800296 pressurecontroller kit SULLAIR 1091-8002-96
1092005691 CONTROLLER 1092-0056-91
1092902333 PULLET CONTROLLER-VSD 1092-9023-33
1096009600 CONTROLLER 1096-0096-00
1096016110 CONTROLLER 1096-0161-10
1096146030 CONTROLLER 1096-1460-30
1310033457 CONTROLLER 1310-0334-57
1310033463 CONTROLLER 1310-0334-63
1310034513 CONTROLLER 1310-0345-13
1310036802 CONTROLLER 1310-0368-02
1310036833 CONTROLLER 1310-0368-33
1604120900 SPEED CONTROLLER 1604-1209-00
1604938200 CONTROLLER 1604-9382-00
1604941800 CONTROLLER 1604-9418-00
1604951600 CONTROLLER 1604-9516-00
1616701700 BEARING CONTROLLER 1616-7017-00
1616701701 BEARING CONTROLLER 1616-7017-01
1616815500 CONTROLLER 1616-8155-00
1616863700 CONTROLLER 1616-8637-00
1616872900 CONTROLLER 1616-8729-00
1616873000 CONTROLLER 1616-8730-00
1616873200 CONTROLLER 1616-8732-00
1616873300 CONTROLLER 1616-8733-00
1616896100 CONTROLLER 1616-8961-00
1617905302 I/O DIGITAL MODULE 1617-9053-02
1623287302 CONTROLLER 1623-2873-02
1623287303 CONTROLLER 1623-2873-03
1624640766 CONTROLLER A5-C2411AR 1624-6407-66
1624642702 REGILO-GI MAIN CONTROLLER AC1 1624-6427-02
1624650359 TEMPE.CONTROLLER EC-002614 1624-6503-59
1624724300 LABEL CONTROLLER 1624-7243-00
1624726780 CONTROLLER ASSY 230V 1624-7267-80
1624726781 CONTROLLER ASSY 115V 1624-7267-81
1625120105 MATER CONTROLLER 1625-1201-05
1625120118 CONTROLLER 1625-1201-18
1625120254 870 CONTROLLER 1625-1202-54
1625120255 870 CONTROLLER 1625-1202-55
1625120257 870 CONTROLLER 1625-1202-57
1625120258 CONTROLLER 1625-1202-58
1625120259 870 CONTROLLER 100A 1625-1202-59
1625120260 CONTROLLER 1625-1202-60

Детали

Вес 0.907 кг
Габариты 27.4 × 19.8 × 8.1 см
1–9 шт.

$1,500.00

≥10 шт.

$1,300.00

Страна происхождения

RO

Срок доставки

7–14 рабочих дней

Минимальный объем заказа

1 штука

Упаковка

Деревянный футляр

Качество продукции

Совершенно новый, оригинальный

Режим транзакций

CIF, DAP, EXW, FOB

Код HS

8414900090

1 отзыв на Atlas Copco 1900520440 Elektronikon MK5S Upgrade Controller

  1. Sven Claes –

    We ordered this controller while updating the control panel on one of our ZR units. The parts desk checked the serial number first and pointed out the correct order route for our setup before anything was shipped. The unit arrived in protective packing with the part number and index form clearly on the label. It slotted into the panel using the existing mounting and connector positions, and the machine came back through its start-up checks without further work. The paperwork for the upgrade was complete and matched the number on the controller.

Добавить отзыв

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Вам также будет интересно…