Описание
The Atlas Copco 2901000600 is the service kit for the minimum pressure valve on oil-injected screw compressors in the GA 11 to GA 22 range. The shop records name it KIT and KIT FOR OIL INJECTED SCREW COMPRESSOR, and the Pack parts lists print the same number in the spaced form 2901 0006 00 under the name Minimum pressure valve kit. Each of these records points to the one kit described on this page.
This page records what the kit contains, the role of the minimum pressure valve on the machine, and the two parts-list families in which 2901000600 appears. Seadweer supplies 2901000600 as a genuine Atlas Copco part and checks every enquiry against the compressor record before confirming the match.
Send us the model and serial number from your compressor nameplate and our parts desk will confirm the match and prepare your quotation.
Product Overview
The 2901000600 is a renewal kit rather than a single part. It gathers the wear items of the minimum pressure valve into one bag, so the valve can be serviced in one intervention without sourcing each component separately. The kit sheet printed for this bag is headed GA11-22 SERVICE KIT, matching the machine range in the parts lists.
The minimum pressure valve sits on the oil-injected screw compressors served by 2901000600 and keeps a set back-pressure on the air end while the machine runs unloaded. The spring and the moving seals inside it do the work across every start and stop, which is why the renewal parts are grouped into a kit. Servicing the valve with the bag contents of 2901000600 restores those moving parts in a single pass.
Two written forms of the number travel with the kit. The shop records and the ERP use the continuous form 2901000600, while the Pack parts lists use the spaced form 2901 0006 00. Both name the same kit, and either can be used when an order is checked against the machine file.

Технические характеристики
The figures below are taken from the official shop records for 2901000600, the kit recorded for the GA 11 to GA 22 range. They are recorded without conversion so the kit can be matched against the machine record. The weight and dimensions describe the packed bag as supplied.
| Параметр | Значение |
|---|---|
| Service part number | 2901000600 |
| Parts-list form | 2901 0006 00 |
| Shop name | KIT |
| Shop description | KIT FOR OIL INJECTED SCREW COMPRESSOR |
| Parts-list name | Minimum pressure valve kit |
| Kit sheet | GA11-22 SERVICE KIT |
| Item weight | 150 g (0.15 kg) |
| Length | 102 mm (10.2 cm) |
| Width | 55 mm (5.5 cm) |
| Height | 55 mm (5.5 cm) |
| Страна происхождения | BE (Belgium) |
| HS code | 73202081 |
| Категория | Комплекты для обслуживания |
The country of origin and the tariff are taken from the shop record, which lists Origin BE and Tarrif 73202081. The bag measures 102 by 55 by 55 mm and weighs 150 g in the official shop specification. Every part in the list below ships inside that one bag.

Kit Contents
The shop record lists the contents of the bag with a quantity for each line. The table below reproduces that list exactly as recorded, in the order given, so the contents can be checked against the kit sheet on receipt.
| Описание | Количество |
|---|---|
| COMPR.SPRING | 1 |
| O-RING 39.2X3 | 1 |
| KIT IN.SH GA11-22 | 1 |
| TUBE GREASE | 1 |
| SC LOCK WASHER 10.2-22-2.7 FZB | 4 |
| O-RING 59.5 X 3 | 1 |
| COMPR.SPRING | 1 |
| CIRCLIPS | 1 |
| PISTON RING | 2 |
The two compressor springs in 2901000600 are listed as separate lines and arrive as two distinct parts, one for the valve stage and one for the unloader stage. The line KIT IN.SH GA11-22 is the internal spring cartridge carrying the kit number on its own marking. The four SC lock washers are the fastener-side items, and the two O-rings cover the two sealing diameters of the valve body.
The TUBE GREASE is packed for assembly, and the two piston rings together with the circlip complete the moving set. Checking the bag of 2901000600 against this table before work starts is the shortest route to a clean strip-down, and the printed kit sheet inside the bag repeats the same lines for that purpose.
Minimum Pressure Valve Function
On an oil-injected screw compressor the minimum pressure valve holds a minimum pressure in the separator tank while the machine supplies air, and it closes the path back to the air end when the machine unloads. The springs, rings and seals in 2901000600 are the parts that perform this switching across every duty cycle.
When those parts wear, the symptoms appear as pressure behaviour at the tank rather than as damage elsewhere. Renewing the valve with 2901000600 brings the springs and sealing set back to the factory state in one intervention. The grease tube in the bag is for the assembly step, so no extra material is needed at the bench.
The valve is serviced in place on the machine. The 2901000600 bag contents cover the renewal, and the machine keeps its original valve body throughout. That is what distinguishes a service kit from a replacement valve assembly in the parts lists.

Coverage in the Pack Parts Lists
The number 2901 0006 00 is printed in the Pack parts list covering the GA 11, GA 15, GA 18 and GA 22. In that list the entry is named Minimum pressure valve kit, and 2901000600 serves the minimum pressure valve fitted to those machines in the Pack configuration.
A second family of lists covers the WorkPlace and WorkPlace Full-Feature machines, document 2930 7003 00, for the GA 11+, GA 15+, GA 18+, GA 22+ and GA 30. In those lists the same number 2901 0006 00 appears under the name Integr. Minimum Pressure Valve kit. The integrated name reflects the valve design on those builds, where the minimum pressure function is combined with the unloader on the same body.
Across both families the kit number stays the same while the valve names differ. It is the machine parts list, keyed to the serial number, that decides which entry applies to a given compressor. Sending the model and serial number together lets the parts desk confirm the entry and the kit in one pass.

Fitment Verification and Service Planning
A machine name is a starting point rather than the final check. The kit 2901000600 is recorded against GA 11 to GA 22 in the Pack lists and against the plus builds in the WorkPlace lists, and the parts list for the specific serial number is what shows whether 2901000600 applies. The kit sheet marking GA11-22 inside the bag matches the Pack range and is read together with the machine record.
Before the valve is opened, record the machine serial number with the kit number in the service file. On receipt, check the bag label and the printed kit sheet against the list above, then lay the parts out in the order of the sheet. The renewal is a single-session job at the bench, and the old springs and seals come out as a set.
Order 2901000600 when the valve service falls due rather than waiting for pressure behaviour to drift. A kit kept with the machine record means the next service starts from a confirmed match instead of a parts-list search.
Часто задаваемые вопросы
The questions below collect the points that come up most often when this minimum pressure valve kit is ordered.
Is 2901000600 the same as 2901 0006 00?
Yes. They are the same kit number written in two forms: 2901000600 in the shop records and 2901 0006 00 in the Pack parts lists. Both name the minimum pressure valve kit for GA 11 to GA 22.
What does the kit contain?
The bag holds two compressor springs, two piston rings, one circlip, four SC lock washers, the O-rings 39.2X3 and 59.5 X 3, the internal cartridge KIT IN.SH GA11-22 and a tube of grease. The kit sheet inside repeats the same list.
Which compressors use this kit?
The Pack lists record it for the GA 11, GA 15, GA 18 and GA 22. The WorkPlace and WorkPlace Full-Feature lists, document 2930 7003 00, record the same number for the GA 11+, GA 15+, GA 18+, GA 22+ and GA 30 as Integr. Minimum Pressure Valve kit.
Why is the kit named Integr. in some lists?
The WorkPlace lists name the entry Integr. Minimum Pressure Valve kit because the valve on those builds combines the minimum pressure function with the unloader. The renewal parts in the bag are the same, so the kit number does not change.
Does the kit include the valve body?
No. 2901000600 is a service kit for the valve already fitted on the machine. It renews the springs, rings, seals and washers while the valve body stays in place.
What should I send when requesting a quotation?
Send the compressor model, the serial number from the nameplate and the quantity. The parts desk confirms the fitment of 2901000600 through the machine parts list before preparing the quotation.

Genuine Atlas Copco Supply from Seadweer
Seadweer supplies 2901000600 as a genuine Atlas Copco service kit, identified by the number on the bag label and the kit sheet inside the bag of 2901000600. Every order is checked against the machine record before the match is confirmed, across both the Pack and the WorkPlace parts-list families.
Two pieces of information settle an order quickly: the kit number and the machine it is going into. Send us the model and serial number from your compressor nameplate and our parts desk will confirm the match and prepare your quotation.
More Atlas Copco Maintenance Kits Available
We can also supply further Atlas Copco maintenance kits on request. Take a look at the table below, or send us your requirement and we will follow up.
| Номер детали | Название детали | Артикул |
|---|---|---|
| 1310300445 | KIT | 1310-3004-45 |
| 1310300446 | KIT | 1310-3004-46 |
| 1310308117 | KIT | 1310-3081-17 |
| 1310308118 | KIT | 1310-3081-18 |
| 1310308119 | KIT | 1310-3081-19 |
| 1310308120 | KIT | 1310-3081-20 |
| 1310308121 | KIT | 1310-3081-21 |
| 1310308123 | KIT | 1310-3081-23 |
| 1310308124 | KIT | 1310-3081-24 |
| 1310308125 | KIT | 1310-3081-25 |
| 1310308127 | KIT | 1310-3081-27 |
| 1310308130 | KIT | 1310-3081-30 |
| 1310308131 | KIT | 1310-3081-31 |
| 1310308132 | KIT | 1310-3081-32 |
| 1310308133 | KIT | 1310-3081-33 |
| 1310308134 | KIT | 1310-3081-34 |
| 1310308136 | KIT | 1310-3081-36 |
| 1310308141 | KIT | 1310-3081-41 |
| 1310308145 | KIT | 1310-3081-45 |
| 1310308147 | KIT | 1310-3081-47 |
| 1310308148 | KIT | 1310-3081-48 |
| 1310308201 | KIT | 1310-3082-01 |
| 1310308300 | KIT | 1310-3083-00 |
| 1310308301 | KIT | 1310-3083-01 |
| 1310308315 | KIT | 1310-3083-15 |
| 1310308321 | KIT | 1310-3083-21 |
| 1310308329 | KIT | 1310-3083-29 |
| 1310308343 | KIT | 1310-3083-43 |
| 1310308346 | KIT | 1310-3083-46 |
| 1310308350 | KIT | 1310-3083-50 |
| 1310308364 | KIT | 1310-3083-64 |
| 1310308381 | KIT | 1310-3083-81 |
| 1310308391 | KIT | 1310-3083-91 |
| 1310308395 | KIT | 1310-3083-95 |
| 1310308402 | KIT | 1310-3084-02 |
| 1310308471 | KIT | 1310-3084-71 |
| 1310308522 | KIT | 1310-3085-22 |
| 1310308527 | KIT | 1310-3085-27 |
| 1310308528 | KIT | 1310-3085-28 |
| 1310308565 | KIT | 1310-3085-65 |
| 1310308566 | KIT | 1310-3085-66 |
| 1310308568 | KIT | 1310-3085-68 |
| 1310308573 | KIT | 1310-3085-73 |
| 1310308587 | KIT | 1310-3085-87 |
| 1310308588 | KIT | 1310-3085-88 |
| 1310308590 | KIT | 1310-3085-90 |
| 1310308594 | KIT | 1310-3085-94 |
| 1310308595 | KIT | 1310-3085-95 |
| 1310308596 | KIT | 1310-3085-96 |
| 1310308598 | KIT | 1310-3085-98 |















Bram Verlinden –
Our GA 22 reached the point where the minimum pressure valve needed its service parts renewed, and the parts list for the machine called up this kit. The bag arrived with every item from the kit sheet present, and the grease tube and the spring cartridge were the pieces I had not expected to find included. Everything matched the printed kit sheet packed inside, which made the strip-down straightforward. The valve was back together in one session and the machine held its pressure as before. The nameplate serial number was all the parts desk needed to confirm the kit.