Descripción
The Atlas Copco ZT 110 is the 110 kW air-cooled machine of the ZR/ZT 110-275 oil-free family, a fixed-speed compressor that brings certified oil-free air to plants without a cooling water circuit. The compression chambers run completely free of oil, the package carries the ISO 8573-1 CLASS 0 (2010) certification verified by TÜV, and the Full Feature build integrates the adsorption dryer inside the same package.
Three pressure versions at 50 Hz and two at 60 Hz cover free air delivery from 266.9 to 317.7 l/s. Cooling is by air alone, so the compressor installs wherever the production needs it.
Where the ZT 110 Sits in the Oil-Free Range
The ZR/ZT 110-275 family serves the plants whose oil-free demand has outgrown the compact 55-90 class but has not yet reached the ZR/ZT 300-750 machines, and the ZT 110 carries 110 kW of installed motor power at the entry of the family. The letter Z marks the oil-free architecture: the compression elements never inject oil into the air stream, so no oil carry-over reaches the process. Where the demand profile swings, the ZT 110 VSD of the same rating adjusts its speed continuously instead of loading and unloading.
Atlas Copco pioneered oil-free air technology over sixty years and became the first manufacturer awarded CLASS 0 certification. The ZT 110 brings that standard into the air-cooled 110 kW class, and the package arrives as a complete all-in-one installation: place it on a flat floor, connect the power line and the air outlet, and push the start button. Lighter oil-free networks in the same family run the ZT 90.
Dos sucursales, una plataforma
Two names describe the branches of the ZT 110, and each adds one fact:
- Estándar: el grupo compresor suministra aire sin aceite para redes con un sistema externo de tratamiento de aire situado aguas abajo; su diseño refrigerado por aire disipa el calor de la compresión al aire de la sala.
- Característica destacada: el paquete integra el secador por adsorción, por lo que el aire seco sale directamente de la máquina sin que se consuma energía externa en la regeneración.
Every version combines with both branches, and both branches share the same 4,040 mm footprint. Plants with a cooling water main on site pick the water-cooled ZR 110 of the same rating.
Technical Specifications of the ZT 110
The table below condenses the ZT 110 into its headline figures:
| Parámetro | Valor |
|---|---|
| Modelo | Atlas Copco ZT 110 |
| Tipo de compresor | Compresor de tornillo sin aceite, refrigerado por aire |
| Control de capacidad | Velocidad fija |
| Potencia del motor instalado | 110 kW / 150 hp |
| Versiones de presión | 7,5 / 8,6 / 10 bar(e) a 50 Hz; 8,6 / 10,4 bar(e) a 60 Hz |
| Entrega gratuita por vía aérea | 266.9-317.7 l/s by version (16.0-19.1 m³/min / 566-673 cfm) |
| Nivel sonoro | 71 dB(A) at the work station |
| Pureza del aire | ISO 8573-1 CLASE 0 (2010), certificado por TÜV |
| Frecuencia | 50 Hz y 60 Hz |
Datos nominales a 50 Hz
El rendimiento de la unidad se mide de acuerdo con la norma ISO 1217, anexo C, edición 4 (2009). Las versiones de 7,5 y 8,6 bar se miden a 7 bar, y la versión de 10 bar, a 9 bar:
| Versión | FAD (l/s) | FAD (m³/min) | FAD (cfm) | Ruido |
|---|---|---|---|---|
| ZT 110 – 7.5 | 306.9 | 18.4 | 650 | 71 dB(A) |
| ZT 110 – 8.6 | 286.2 | 17.2 | 606 | 71 dB(A) |
| ZT 110 – 10 | 266.9 | 16.0 | 566 | 71 dB(A) |
The 7.5 bar version leads the series at 306.9 l/s (650 cfm), and the 10 bar band delivers 266.9 l/s (566 cfm). The installed motor power stays at 110 kW across all versions, and the sound pressure level holds at 71 dB(A) at the work station.
Datos nominales a 60 Hz
The 60 Hz range covers two versions at 8.6 and 10.4 bar(e), and the motor is rated at 150 hp. The measurement pressures follow the same rule as at 50 Hz:
| Versión | FAD (l/s) | FAD (m³/min) | FAD (cfm) | Ruido |
|---|---|---|---|---|
| ZT 110 – 8.6 | 317.7 | 19.1 | 673 | 71 dB(A) |
| ZT 110 – 10.4 | 288.6 | 17.3 | 612 | 71 dB(A) |
The 8.6 bar version tops the whole series at 317.7 l/s (673 cfm). The noise level is the A-weighted emission sound pressure level at the work station, measured according to ISO 2151: 2004 using ISO 9614/2, with a total uncertainty value of 3 dB(A).
Dimensiones y peso
Both branches of the ZT 110 share one footprint, because the air-cooled layout carries the dryer inside the same frame length:
| Sucursal | Peso | Dimensiones (largo × ancho × alto) |
|---|---|---|
| ZT 110, Standard | 3,560 kg / 7,848 lb | 4,040 × 1,650 × 2,000 mm (159.1 × 65.0 × 78.7 in) |
| ZT 110, Full Feature | 4,070 kg / 8,973 lb | 4,040 × 1,650 × 2,000 mm (159.1 × 65.0 × 78.7 in) |
No se necesitan cimientos para ninguna de las dos ramas. El equipo se instala directamente sobre el suelo liso de la sala de compresores, y el diseño refrigerado por aire elimina de la planificación de la instalación la tubería principal de agua de refrigeración, el tratamiento del agua y la gestión de la condensación.
Pureza del aire de clase 0, verificada por TÜV
The ZT 110 belongs to the oil-free range certified according to ISO 8573-1 CLASS 0 (2010). TÜV type-tested the range with the most rigorous methodologies available, measuring all possible oil forms across a range of temperatures and pressures, and found no traces of oil at all in the output air stream. CLASS 0 is the most stringent class of the standard: the total oil concentration is as specified by the equipment user or supplier and more stringent than class 1.
That certification is what makes the ZT 110 the default choice where a single trace of oil costs a batch: food and beverage lines running fermentation, packaging and filling, electronics plants cleaning chips and boards, petrochemical operations in extreme heat and humidity, and pharmaceutical production from tablet coating to bottling.
Refrigeración por aire para una instalación sencilla
Air cooling defines the ZT branch of the family. The cooling circuit rejects the heat of compression into the room air, which keeps the package free of any water dependency and holds the installation simple. The sound pressure level reads 71 dB(A), two decibels above the water-cooled ZR sibling of the same rating.
Dado que el calor se expulsa a través de la corriente de aire de refrigeración, las opciones de conductos permiten evacuar el aire caliente fuera de la sala de máquinas o recuperarlo para la calefacción de los locales durante la temporada de frío, lo que convierte parte de la energía de compresión en un recurso para las instalaciones.
Artículo completo: El secador por adsorción integrado
In the ZT 110 Full Feature, the adsorption dryer eliminates the moisture before it enters the air net. The dryer regenerates with the heat of the compressor, so no external energy is needed to dry the air, and the savings against a conventional dryer are large. The pressure drop through the dryer is minimal, which cuts the operating cost again, and the whole drying function lives inside the compressor package instead of beside it.
Control y supervisión
El controlador de la unidad Elektronikon gestiona el compresor y el secador integrado desde un único sistema de control. La pantalla muestra las condiciones de funcionamiento mediante iconos claros y una navegación intuitiva, supervisa el estado de mantenimiento y emite avisos proactivos de mantenimiento, alarmas en caso de averías y paradas de seguridad. Las funciones integradas de control remoto y notificación vienen de serie con comunicación a través de Ethernet.
SMARTLINK y opciones
The option list of the ZT 110 tailors the package to the plant:
- SMARTLINK: supervisión en línea de los datos del sistema de aire comprimido con avisos de alerta y programación del mantenimiento.
- Filtro de partículas de larga duración y otras opciones para la calidad del aire, para materiales de recubrimiento específicos y objetivos de pureza exigentes.
- Embalaje en caja de madera, certificados de materiales, certificado de ensayo y ensayo de rendimiento realizado ante testigos: para una instalación controlada y una recepción documentada.
Every ZT 110 is shop-tested before it leaves the factory, and the witnessed performance test option documents the measured flow and pressure against the specification for the acceptance record of the project. Combined with the material certificates and the wooden case packaging, the package arrives ready for a controlled installation from the first day.
Applications of the ZT 110
Food and beverage plants run the ZT 110 for fermentation, aeration, transportation, filling and capping, where the CLASS 0 certification removes the contamination risk from the audit trail. Electronics manufacturers use the clean, dry air for removing microscopic debris from chip and board surfaces, and petrochemical sites value the machine’s ability to run in extreme temperatures and humidity conditions around the clock.
Pharmaceutical production completes the picture, from fermentation and tablet coating to packing and bottling, where 100 percent oil-free air protects both the process and the brand. Where the demand profile fluctuates heavily, the plant adds the ZT 110 VSD of the same rating next to this fixed-speed machine, and growing networks step up to the larger models of the same family.
Service and Support Around the ZT 110
The ZT 110 is built for long overhaul intervals, few service interventions and minimal maintenance cost, and every machine is tested before delivery to ensure it meets the specifications. A global service operation with field service engineers across 160 countries backs the installed base, and genuine Atlas Copco parts keep the package at its rated performance.
Seadweer supplies genuine Atlas Copco spare parts and service kits for the ZT 110 and its Full Feature branch. Send us the compressor model together with the parts you need, and the correct items are confirmed with the quotation in one pass.
Preguntas frecuentes
What does the ZT 110 deliver at 7.5 bar?
The 7.5 bar version delivers 306.9 l/s at 50 Hz, which equals 18.4 m³/min or 650 cfm, measured at 7 bar according to ISO 1217 annex C, edition 4 (2009). At 60 Hz the 8.6 bar version reads 317.7 l/s (673 cfm).
Is the ZT 110 air-cooled?
Yes. The ZT letter marks the air-cooled branch of the ZR/ZT family: the cooling circuit rejects the heat of compression into the room air, so no cooling water main is needed. The sound level reads 71 dB(A), and the water-cooled equivalent is the ZR 110.
¿Hasta qué punto está libre de aceite el aire?
The ZT 110 carries the ISO 8573-1 CLASS 0 (2010) certification verified by TÜV, the most stringent class of the standard. TÜV testing found no traces of oil at all in the output air stream across the tested range.
¿Qué incluye la versión «Full Feature»?
Full Feature integrates the adsorption dryer inside the compressor package. The dryer regenerates with the heat of the compressor, so no external energy is needed, and the package weight grows from 3,560 kg to 4,070 kg while the footprint stays at 4,040 × 1,650 × 2,000 mm.
¿Por qué en la gama de 60 Hz solo aparecen dos versiones?
La tabla de especificaciones oficiales para 60 Hz incluye las versiones de 8,6 y 10,4 bar(e), que se ajustan a los rangos de presión más habituales en las redes de 60 Hz. A 50 Hz, la serie abarca tres versiones, desde 7,5 hasta 10 bar(e).
How loud is the ZT 110?
The sound pressure level at the work station reads 71 dB(A) on every version at both frequencies. The value follows ISO 2151: 2004 with the ISO 9614/2 method and carries a total uncertainty value of 3 dB(A).
Colm Gallagher –
We needed more oil-free capacity and had no cooling water circuit, so the ZT 110 was the straightforward answer. The package holds 71 dB(A) beside the line, the pressure stays flat at 7.5 bar across two shifts, and the Full Feature dryer delivers dry air straight from the machine. Seadweer matched the model and our pressure to the right version in one reply.