Описание
The Atlas Copco 3002604880 is the service kit for the minimum pressure valve on oil injected screw compressors in the G 200 and G 250 range. The shop record names it MPV KIT FOR OIL INJECTED SCREW COMPRESSORS, and the record describes the one kit documented on this page.
This page records what the bag contains, the role of the minimum pressure valve on large oil injected machines, and the shop records in which 3002604880 appears. Seadweer supplies 3002604880 as a genuine Atlas Copco part and checks every enquiry against the compressor record before confirming the match.
Send us the model and serial number from your compressor nameplate and our parts desk will confirm the match and prepare your quotation.
Product Overview
The 3002604880 is a renewal kit rather than a single part. It gathers the wear items of the minimum pressure valve into one delivery, so the valve on a G 200 or G 250 can be serviced in one intervention without sourcing each component separately. The packed bag is a substantial item, and its 2.18 kg of recorded weight reflects the size of the parts inside.
The minimum pressure valve on an oil injected screw compressor keeps a set back-pressure in the separator tank while the machine runs, and it closes the path back to the air end when the machine unloads. On the G 200 and G 250 the valve is a large component, and the springs and seals that do the switching work are sized to match. Servicing the valve with the contents of 3002604880 restores those moving parts in a single pass.
The abbreviation MPV in the shop description stands for the minimum pressure valve, and the description MPV KIT FOR OIL INJECTED SCREW COMPRESSORS names the same kit as the number 3002604880. Either reference can be used when an order is checked against the machine file.

Технические характеристики
The figures below are taken from the official shop records for 3002604880, the MPV kit recorded for the G 200 and G 250 range. They are recorded without conversion so the kit can be matched against the machine record. The weight and dimensions describe the packed bag as supplied.
| Параметр | Значение |
|---|---|
| Service part number | 3002604880 |
| Shop description | MPV KIT FOR OIL INJECTED SCREW COMPRESSORS |
| Item weight | 2.18 kg |
| Length | 150 mm (15 cm) |
| Width | 150 mm (15 cm) |
| Height | 105 mm (10.5 cm) |
| Страна происхождения | BE (Belgium) |
| HS code | 8414900090 |
| Категория | Комплекты для обслуживания |
The country of origin and the HS code are recorded in our product file for 3002604880. The bag measures 150 by 150 by 105 mm and weighs 2.18 kg in the official shop specification. Every part in the list below ships inside that one delivery.

Kit Contents
The shop record lists the contents of the bag with a quantity for each line. The table below reproduces that list exactly as recorded, in the order given, so the contents can be checked on receipt before the valve is opened.
| Описание | Количество |
|---|---|
| SPRING | 1 |
| SPRING | 1 |
| O-RING 113.1X2.93 | 1 |
| O-RING | 2 |
| VALVE CHECK | 1 |
The two SPRING lines in 3002604880 are listed separately and arrive as two distinct parts, one large and one small, matching the two spring stages of the valve. The line O-RING 113.1X2.93 is the large section seal for the main diameter of the valve body, and the two further O-rings cover the remaining sealing positions.
The VALVE CHECK is the check valve element of the assembly, and it is the piece around which the springs and seals of 3002604880 are arranged on the bench. Checking the bag of 3002604880 against this table before work starts is the shortest route to a clean strip-down, because the five lines together make up the complete moving and sealing set of the valve.
Minimum Pressure Valve Function on the G Range
On an oil injected screw compressor the minimum pressure valve holds a minimum pressure in the separator tank while the machine supplies air, and it shuts the return path when the machine unloads. The springs, seals and check element in 3002604880 are the parts that perform this switching across every duty cycle of the machine.
On the G 200 and G 250 the air flow through the valve is large, and the parts in 3002604880 are sized accordingly. When the springs or seals wear, the effect shows as pressure behaviour at the tank rather than as damage elsewhere in the machine. Renewing the valve with 3002604880 brings the moving set of the valve back to the factory state in one intervention, and 3002604880 carries every line the job calls for.
The valve is serviced in place on the machine. The bag contents cover the renewal, and the machine keeps its original valve housing throughout. That is what distinguishes a service kit from a replacement valve assembly in the parts records.

Coverage for the G 200 and G 250
The kit 3002604880 is recorded for the G 200 and G 250, two large machines in the oil injected screw compressor range. The shop records carry the kit against these models, and the parts list for the specific serial number is what shows whether the kit applies to a given compressor.
A machine name is a starting point rather than the final check. The record for the individual machine, keyed to the serial number on the nameplate, fixes the fitment of the kit. Sending the model and the serial number together lets the parts desk confirm the entry and the kit in one pass, which is the same practice applied across the G range and the GA range alike.

Service Planning and Ordering
Before the valve is opened, record the machine serial number with the kit number in the service file. On receipt, check the bag against the contents table above, then lay the parts out in the order of the list. The two springs, the three sealing positions and the check element come out and go back as a set, and the renewal is planned as a single-session job at the machine.
Order 3002604880 when the valve service falls due rather than waiting for tank pressure behaviour to drift, because 3002604880 is the reference the parts desk reads against the machine file. A kit kept with the machine record means the next service starts from a confirmed match instead of a parts search, and the packed bag holds every line the job needs.
Часто задаваемые вопросы
The questions below collect the points that come up most often when this MPV kit is ordered.
What does MPV stand for in the kit description?
MPV stands for minimum pressure valve. The full shop description reads MPV KIT FOR OIL INJECTED SCREW COMPRESSORS, and the kit renews the moving and sealing parts of that valve.
Which compressors use 3002604880?
The kit is recorded for the G 200 and G 250, two large machines in the oil injected screw compressor range. The parts list for the specific serial number is the final check for fitment.
What does the kit contain?
The bag holds two springs listed as separate lines, the O-ring 113.1X2.93, two further O-rings and the valve check unit. The five lines together form the complete moving and sealing set of the valve.
Does the kit include the valve housing?
No. 3002604880 is a service kit for the valve already fitted on the machine. It renews the springs, seals and check element while the valve housing stays in place.
What should I send when requesting a quotation?
Send the compressor model, the serial number from the nameplate and the quantity. The parts desk confirms the fitment of 3002604880 through the machine record before preparing the quotation.

Genuine Atlas Copco Supply from Seadweer
Seadweer supplies 3002604880 as a genuine Atlas Copco service kit, identified by the kit name and the number in the shop record. Every order is checked against the machine record before the match is confirmed, so the bag that arrives matches the valve on the machine it is going into.
Two pieces of information settle an order quickly: the kit number and the machine it is going into. Send us the model and serial number from your compressor nameplate and our parts desk will confirm the match and prepare your quotation.
Other Atlas Copco Maintenance Kits Available
Further Atlas Copco maintenance kits can be supplied on request. Have a look at the table below, or get in touch with us for more information.
| Номер детали | Название детали | Артикул |
|---|---|---|
| 1310308602 | KIT | 1310-3086-02 |
| 1310308604 | KIT | 1310-3086-04 |
| 1310308606 | KIT | 1310-3086-06 |
| 1310308608 | KIT | 1310-3086-08 |
| 1310308610 | KIT | 1310-3086-10 |
| 1310308612 | KIT | 1310-3086-12 |
| 1310308613 | KIT | 1310-3086-13 |
| 1310308614 | KIT | 1310-3086-14 |
| 1310308615 | KIT | 1310-3086-15 |
| 1310308624 | KIT | 1310-3086-24 |
| 1310308627 | KIT | 1310-3086-27 |
| 1310308633 | KIT | 1310-3086-33 |
| 1310308640 | KIT | 1310-3086-40 |
| 1310308648 | KIT | 1310-3086-48 |
| 1310308659 | KIT-SERVICE | 1310-3086-59 |
| 1310308660 | KIT-SERVICE | 1310-3086-60 |
| 1310308662 | KIT | 1310-3086-62 |
| 1310308663 | KIT | 1310-3086-63 |
| 1310308668 | KIT | 1310-3086-68 |
| 1310308719 | KIT | 1310-3087-19 |
| 1310308721 | KIT | 1310-3087-21 |
| 1310308758 | KIT | 1310-3087-58 |
| 1310308761 | KIT | 1310-3087-61 |
| 1310308775 | KIT | 1310-3087-75 |
| 1310308805 | KIT | 1310-3088-05 |
| 1310308806 | KIT | 1310-3088-06 |
| 1310308811 | KIT | 1310-3088-11 |
| 1310308827 | KIT | 1310-3088-27 |
| 1310308828 | KIT | 1310-3088-28 |
| 1310308850 | KIT-SERVICE | 1310-3088-50 |
| 1310308852 | KIT-SERVICE | 1310-3088-52 |
| 1310308858 | KIT | 1310-3088-58 |
| 1310308860 | KIT | 1310-3088-60 |
| 1310308871 | KIT | 1310-3088-71 |
| 1310308873 | KIT | 1310-3088-73 |
| 1310308875 | KIT | 1310-3088-75 |
| 1310308882 | KIT | 1310-3088-82 |
| 1310308894 | KIT | 1310-3088-94 |
| 1310308895 | KIT | 1310-3088-95 |
| 1310308902 | KIT | 1310-3089-02 |
| 1310308903 | KIT | 1310-3089-03 |
| 1310308918 | KIT | 1310-3089-18 |
| 1310308920 | KIT | 1310-3089-20 |
| 1310308921 | KIT | 1310-3089-21 |
| 1310308923 | KIT | 1310-3089-23 |
| 1310308926 | KIT | 1310-3089-26 |
| 1310308927 | KIT | 1310-3089-27 |
| 1310308950 | KIT | 1310-3089-50 |
| 1310308954 | KIT | 1310-3089-54 |
| 1310308955 | KIT | 1310-3089-55 |















Gert Van Hove –
The minimum pressure valve on our G 250 was due for its renewal and the kit for the job was this one. The bag was heavier than I expected, which matched the 2.18 kg in the shop specification, and every line from the kit list was present when I checked it on the bench. The large spring and the valve check were the pieces that took the most care during assembly, and the seals went in without any trimming. The valve was back in service the same day and the machine has held its tank pressure as it did before the work.