الوصف
The Atlas Copco 1900520413 is the Mk5S Elektronikon Touch 4G controller, the unit listed under the MK5S_TOUCH control configuration from 29/05/2023. The official parts list prints the same number as 1900 5204 13, with the digits grouped in the Atlas Copco style. Both forms identify the fourth-generation Touch controller covered here.
In the 23.1 Controller position, earlier validity dates belong to the graphic controller 1900 5200 13 and the Touch controller 1900 5204 00. The 1900520413 entry is the one that starts on 29/05/2023. Seadweer supplies it as a genuine Atlas Copco part.
Send us the model and serial number from your compressor nameplate and our parts desk will confirm the match and prepare your quotation.
نظرة عامة على المنتج
The 1900520413 is a controller panel for compressors running the MK5S_TOUCH regulation. It carries the touch display and the control electronics in one unit, and it is the version of the Touch controller identified by the 4G designation in the official parts list. The listing applies from 29/05/2023 in the 23.1 Controller position of parts list 2930 7205 80.
The controller sits at the operator interface of the machine. It reports the compressor state on its display and holds the control configuration that the machine runs under. When a controller is renewed, the replacement is chosen by the regulation name and the generation recorded for that machine, not by the panel shape alone.
Two identifiers travel with this part. The ERP record uses the continuous form 1900520413, while the parts list uses the spaced form 1900 5204 13. They are the same controller number written in two ways, and both are useful when a record is checked at the order desk.

المواصفات الفنية
The figures below are taken from the ERP entry and the official parts list for 1900520413. They are recorded here without conversion so that the part can be matched against the machine record.
تحديد قطع الغيار
| المعلمة | القيمة |
|---|---|
| Service part number | 1900520413 |
| Parts-list form | 1900 5204 13 |
| الوصف | Mk5S Elektronikon Touch 4G |
| Parts-list name | ELEKTRONIKON TOUCH CONTROLLER 4G |
| Reference price | 1,954.84 EUR |
| الفئة | وحدة التحكم |
| Regulation | MK5S_TOUCH |
| Valid from | 29/05/2023 |
| Order reference | 1900520414 |
| مجموعة المنتجات | PEGA |
| بلد المنشأ | RO (Romania) |
| HS code | 8537109199 |
The order reference is an instruction carried in the ERP text for 1900520413: orders are directed to 1900520414. It is a routing note attached to the part record, and it is reproduced here so that the order desk can follow the same instruction as the parts list.
الأبعاد والوزن
| المعلمة | القيمة |
|---|---|
| الطول | 25 cm |
| العرض | 19 cm |
| الارتفاع | 8 cm |
| الوزن | 0.95 kg |
The panel measures 25 by 19 by 8 cm and weighs 0.95 kg. These are the ERP dimensions for the controller as a single unit, and they describe the 1900520413 panel rather than the carton or the complete control assembly.
Connectivity Generation and the 4G Designation
The 4G designation separates this Touch controller from the earlier entries in the same position. The parts list names 1900 5204 13 as the Touch controller 4G and gives it a validity date of 29/05/2023. The 4G label is part of the official part name recorded for 1900520413.
A corresponding 4G entry exists in the Swipe line, where 1900 5202 01 carries the same start date. The two 4G controllers belong to different regulation families and carry different numbers. The machine record is what identifies which family and which generation applies to a given compressor.
Connectivity is part of the controller’s role in the installation, but the part itself is the panel supplied under 1900520413. Accessories associated with the 4G position are listed separately in the parts list and are covered below.

Controller Evolution in the 23.1 Position
The 23.1 Controller table records a sequence of panel numbers for each regulation, with validity dates that mark where one entry ends and the next begins. For the Touch regulation, that sequence runs through three part numbers.
| Ref | رقم القطعة | Name | Validity |
|---|---|---|---|
| 1010 | 1900 5200 13 | ELEKTRONIKON GRAPHIC CONTROLLER | 28/07/2017 to 07/05/2019 |
| 1010 | 1900 5204 00 | ELEKTRONIKON TOUCH CONTROLLER | 08/05/2019 to 28/05/2023 |
| 1010 | 1900 5204 13 | ELEKTRONIKON TOUCH CONTROLLER 4G | 29/05/2023 onwards |
The 1900520413 entry is the third line of that sequence and the one valid from 29/05/2023. The earlier Touch controller 1900 5204 00 is recorded up to 28/05/2023, and the graphic controller 1900 5200 13 up to 07/05/2019. Each number belongs to its own date band in the same controller position.
Reading the table by validity date, rather than by the panel name alone, keeps the generations apart. A machine built under the later configuration is recorded against the 4G number, and that is the number 1900520413 carries.

Touch and Swipe Regulation Families
The same 23.1 table separates controllers into two regulation families. The legend names them REGUL:MK5S_SWIPE and REGUL:MK5S_TOUCH, and each family has its own list of panel numbers and dates. The 1900520413 controller is recorded under the Touch family.
The Swipe family runs from 1900 5200 02 through 1900 5202 00 to the 4G entry 1900 5202 01. The Touch family runs from 1900 5200 13 through 1900 5204 00 to 1900 5204 13. The two families share the controller position but not the part numbers, so the regulation name is checked along with the number before an order is placed.
For a compressor recorded under MK5S_TOUCH, the controller of interest is the Touch line and, for the later validity band, the 1900520413 number within it. The parts list tied to the machine serial number is the record that shows this directly.
Fitment Verification
The official usage record for 1900520413 lists GA 15, GA 18, GA 22, GA 26 and GA 30 compressors under the MK5S_TOUCH configuration from 29/05/2023. These are the machines named in the parts list for the 1900 5204 13 entry.
A model designation covers a number of build configurations, so the name on its own does not fix the controller number. The reliable confirmation runs through the parts list of the machine, keyed to the serial number on its nameplate. That record ties a specific compressor to the 4G Touch controller 1900520413 or to an earlier entry in the same line.
Seadweer checks the serial number against the order before confirming the match. Sending the model and the serial number together lets the parts desk confirm the controller in one pass and avoids a panel that belongs to a different regulation or generation.

Installation and Service Planning
The panel is supplied as a single controller unit. It is ordered under 1900520413, and the order reference 1900520414 is the routing note carried in the ERP text for that part. The carton label repeats the controller number so the delivered unit can be checked on receipt.
At 25 by 19 by 8 cm and 0.95 kg, the panel is handled as one piece. Keep the display face protected before fitting, and match the connector positions on the replacement to those of the unit being removed. The control configuration belongs to the machine, so the new panel is set up against the machine record once it is in place.
The parts list places the 1900520413 controller alongside other lines in the 23.1 position. Repairs can include those items when the machine record calls for them, and listing the serial number with the order lets the parts desk confirm which lines apply.
الأسئلة الشائعة
The questions below collect the points that come up most often when a Touch 4G controller is ordered.
Is 1900520413 the same as 1900 5204 13?
Yes. They are the same controller number written in two forms: 1900520413 in the ERP and 1900 5204 13 in the parts list. Both name the Touch controller 4G.
Which compressors use the 1900520413 controller?
The official record lists GA 15, GA 18, GA 22, GA 26 and GA 30 compressors under the MK5S_TOUCH configuration from 29/05/2023. Fitment for a particular machine is confirmed through its serial number.
What separates the Touch and Swipe controllers?
They are two regulation families in the same 23.1 Controller position, each with its own part numbers. The 1900520413 controller belongs to MK5S_TOUCH; the Swipe 4G controller carries the separate number 1900 5202 01.
Which parts-list lines belong with the 4G Touch controller?
The 23.1 table also lists wire harness 2205 0303 61, antenna 1089 9593 11, four screws and four lock washers at that position. The antenna and the 4G controller share the 29/05/2023 validity date under the Touch regulation.
What does the order reference 1900520414 mean?
It is the routing instruction recorded in the ERP text for 1900520413, directing orders to 1900520414. The parts desk follows that instruction when the order is processed.
Can an earlier Touch controller be used in place of 1900520413?
The parts list assigns each Touch controller a validity band. The 1900520413 number is the one recorded from 29/05/2023, and the machine’s own parts list shows which band that machine falls under.

مستلزمات أصلية من شركة أطلس كوبكو مقدمة من شركة سيادوير
Seadweer supplies 1900520413 as a genuine Atlas Copco controller, recorded under the parts-list form 1900 5204 13. Every order is checked against the machine record before the match is confirmed, so the panel that arrives belongs to the regulation and generation the compressor calls for.
Two pieces of information lock an order down quickly: the part number and the machine it is going into. Send us the model and serial number from your compressor nameplate and our parts desk will confirm the match and prepare your quotation.
Other Atlas Copco Controllers Available
Additional Atlas Copco controllers are available on request. See the table below, or contact us and we will look into your requirement.
| رقم القطعة | اسم القطعة | رقم القطعة |
|---|---|---|
| 1625120589 | CONTROLLER | 1625-1205-89 |
| 1625121050 | CONTROLLER | 1625-1210-50 |
| 1625121508 | CONTROLLER | 1625-1215-08 |
| 1625121546 | CONTROLLER | 1625-1215-46 |
| 1625140082 | CONTROLLER DISPLAYER | 1625-1400-82 |
| 1625140106 | CONTROLLER | 1625-1401-06 |
| 1625140117 | CONTROLLER | 1625-1401-17 |
| 1625140156 | CONTROLLER | 1625-1401-56 |
| 1625140229 | CONTROLLER | 1625-1402-29 |
| 1625140232 | CONTROLLER | 1625-1402-32 |
| 1625140369 | CONTROLLER | 1625-1403-69 |
| 1625140453 | CONTROLLER | 1625-1404-53 |
| 1625140491 | CONTROLLER | 1625-1404-91 |
| 1625140557 | CONTROLLER OF V110D | 1625-1405-57 |
| 1625140806 | 870 CONTROLLER 100A | 1625-1408-06 |
| 1625140933 | CONTROLLER | 1625-1409-33 |
| 1625141378 | CONTROLLER | 1625-1413-78 |
| 1625141434 | CONTROLLER | 1625-1414-34 |
| 1625141625 | CONTROLLER | 1625-1416-25 |
| 1625141626 | CONTROLLER | 1625-1416-26 |
| 1625165307 | PROPORTIONAL CONTROLLER | 1625-1653-07 |
| 1625179296 | MATER CONTROLLER | 1625-1792-96 |
| 1625181619 | CONTROLLER | 1625-1816-19 |
| 1625195141 | CONTROLLER DOOR | 1625-1951-41 |
| 1625195427 | CONTROLLER DOOR | 1625-1954-27 |
| 1627441079 | CONTROLLER | 1627-4410-79 |
| 1627441328 | CONTROLLER | 1627-4413-28 |
| 1627441598 | CONTROLLER | 1627-4415-98 |
| 1627441891 | CMC Q1 CONTROLLER | 1627-4418-91 |
| 1627800300 | CONTROLLER | 1627-8003-00 |
| 1630010000 | FUNCT.LICENSE ES4I(MK5)CONTROL | 1630-0100-00 |
| 1630010300 | FUNCT.LIC. ES6I(MK5) CONTROL | 1630-0103-00 |
| 1630027871 | OPT. WH MK5 UPGR Z400-900VSD | 1630-0278-71 |
| 1630027873 | OPT. WH MK5 UPGR Z300-750 | 1630-0278-73 |
| 1630800561 | MAIN CONTROLLER METACENTRE SX | 1630-8005-61 |
| 1630800562 | METACENTRE P4 T1 CONTROLLER | 1630-8005-62 |
| 1631019300 | DECAL CONTROLLER | 1631-0193-00 |
| 1635289700 | CONTROLLER | 1635-2897-00 |
| 1639690132 | CONTROLLER R134A 230V | 1639-6901-32 |
| 1639696031 | DIGITAL CONTROLLER R134A | 1639-6960-31 |
| 1639696032 | CONTROLLER R134A | 1639-6960-32 |
| 1639696033 | ELITECH CONTROLLER R410A | 1639-6960-33 |
| 1900203385 | CUBIC HDM 115V MK5 CSA/UL IE3 | 1900-2033-85 |
| 1900520001 | ELEKTRONIKON MK5 STD | 1900-5200-01 |
| 1900520022 | ELEKTRONIKON MK5 GRAPHIC PLUS | 1900-5200-22 |
| 1900520025 | QUINCY MK5 GRAPHIC PLUS | 1900-5200-25 |
| 1900520031 | ELEKTRONIKON MK5 I/0 | 1900-5200-31 |
| 1900520033 | ELEKTRONIKON MK5 I/O2 | 1900-5200-33 |
| 1900520037 | ELEKTRONIKON MK5 I/O2 | 1900-5200-37 |
| 1900520042 | ELEKTRONIKON MK5 I/O34 | 1900-5200-42 |















Joris De Cock –
We ordered 1900520413 for a GA 30 that was due for a control refresh. The parts desk checked the serial number first and confirmed that the 4G Touch version was the one listed for that machine. The panel arrived in a protective carton with the number printed on the label, and the mating connector lined up with the existing harness. The antenna from the same parts-list position came in the same order, so the fitting was completed in one visit. The unit has been running on the MK5 Touch regulation since it was fitted.