Elemento de tornillo sin aceite Atlas Copco 1616727581 LP-T3

Descripción

El 1616727581 is the ELEMENT LP-T3, the low-pressure oil-free screw element that Atlas Copco lists for the ZR and ZT 30–55 VSD compressors, with the VSD+ and FLX builds of the same range drawing the stage through their own ordering code. It is the first compression step of a two-stage oil-free package, and it is renewed as a complete factory assembly rather than rebuilt in place.

The stage carries one number in two printed forms. The item record names it as the 1616727581, and the same element is printed in the form 1616 7275 81 on the housing plate and across the build documents. It is listed as serialized, so a plate on each unit identifies it on its own rather than by family alone.

Packed, the 1616727581 measures 45 × 45 × 52 cm and weighs 90 kg, and Belgium is recorded as the country of origin. This article sets out what the LP-T3 designation covers, which machines take the stage, how the two ordering routes work, and how fitment is confirmed before an order is placed.

Identity of the 1616727581 Element

Un elemento es la etapa de compresión principal de un compresor de tornillo, y el 1616727581 fills that role as the LP-T3 stage. It converts shaft power into air flow at pressure, and it is a long-life factory assembly: the rotor pair, the housing and the bearings are built as one and renewed as one.

The interfaces on that assembly are set by the machine it was built for, which is why the 1616727581 is ordered against a compressor record rather than against a description.

What the LP-T3 Designation Covers

LP stands for the low-pressure position, the first compression step of the two-stage oil-free packages in the ZR and ZT ranges. T3 is the stage code Atlas Copco records for this element, and it separates the LP-T3 from the other stages of the same oil-free family.

Atlas Copco prints the same number in two forms. The ten-digit form 1616727581 is what the item record carries, and 1616 7275 81 is the printed form used on the housing plate and the build documents. Both name the same stage, and either one can be used when a renewal is being confirmed.

One Stage, Two Ordering Routes

El 1616727581 itself is the element, but the route an order takes depends on the build of the machine it goes into. Atlas Copco records one service kit reference for the ZR and ZT 30–55 VSD builds and a separate DT reference for the VSD+ and FLX builds of the same range.

Both routes deliver the same stage position, so the practical question for a renewal is not which number is correct but which build the machine carries. That question is settled from the nameplate, and the sections below take each route in turn.

Compressors That Take the 1616727581

Atlas Copco lists the 1616727581 for its oil-free ZR and ZT 30–55 VSD platform, and the coverage extends across the VSD+ and FLX builds of the same model range. The table below collects the documented coverage.

Model range	Build	Stage role
ZR 30–55	VSD	Low-pressure element
ZT 30–55	VSD	Low-pressure element
ZR/ZT 30–55	VSD+	Low-pressure element
ZR/ZT 30–55	FLX	Low-pressure element

The ZR/ZT 30–55 VSD Range

The ZR and ZT 30–55 VSD compressors are oil-free rotary screw machines with variable speed drive, built for plants that cannot allow lubricant into the air they produce. In the parts records for these machines the 1616727581 appears as the LP-T3 low-pressure element.

The stage is the point in the package where oil-free air quality is first set, because everything the high-pressure stage receives passes through the low-pressure position before it.

The VSD+ and FLX Builds

The VSD+ and FLX builds share the compression platform and the same low-pressure stage, and Atlas Copco records the 1616727581 for them under their own ordering code rather than the VSD kit reference. The stage itself does not change between the builds; what changes is the reference an order is placed against.

That distinction matters at the counter, not in the machine. A fitter reading the housing plate sees the same element number on every build in the range, and the build decides only which route the order follows.

Why Fitment Is Confirmed per Machine

The ZR and ZT oil-free ranges do not draw on a single element number. Different generations and configurations of the same model family carry different stage codes, and which one applies is decided by the build of the individual machine.

That is why the 1616727581 is confirmed from the parts list for a machine serial number rather than from the model name alone. Two machines that read almost the same on the badge can take different stages, and the record is what settles it.

Ordering Through the Service Kits

Atlas Copco channels the renewal of this stage through two references, one per build. Neither reference replaces the element number; both name the route the order takes for a given machine.

Kit 1837035000 for ZR/ZT 30–55 VSD

For the ZR and ZT 30–55 VSD builds, the 1616727581 is ordered through service kit 1837035000. The kit reference groups the stage with what the build needs around it, so the renewal arrives as one documented package for that machine family.

Where a machine file carries the kit number, it describes the same stage position the element number names. Both references can appear in the same record, and they resolve to one stage.

DT 8153349455 for VSD+ and FLX

For the VSD+ and FLX builds, the ordering reference is DT 8153349455. The DT prefix marks the route for those builds, and the 1616727581 sits behind it exactly as it sits behind the kit reference on the VSD machines.

Reading the build off the nameplate is what picks the route. Once the build is known, the reference follows, and the stage that arrives is the same LP-T3 either way.

The Low-Pressure Position in a Two-Stage Unit

Oil-free packages of this range compress in two stages with cooling between them, and the two positions take different elements. The 1616727581 is the low-pressure stage, the first compression step where ambient air is brought to an intermediate pressure.

What the LP Stage Does

The rotor pair of the 1616727581 turns in a precision-bored housing with nothing added to the compression chamber, so the air moving through it picks up no lubricant from the stage itself. Timing gears at the drive end hold the rotors in phase, and precision rolling bearings carry the shaft loads.

The discharge of the low-pressure position feeds the second stage, so its output condition shapes what the whole package delivers. A stage renewed here restores the first half of that chain.

Stage Pairing and the HP Position

The high-pressure position of the same machine draws a different element, recorded under its own number for each build. The two stages are ordered separately, and the parts list for the machine names each one.

When a package reaches renewal age, both positions are read from the machine record rather than assumed together. The 1616727581 covers the low-pressure position only, and its counterpart is confirmed the same way: from the parts list for the serial number.

Handling the 90 kg Stage

At 90 kg and 45 × 45 × 52 cm, the 1616727581 sits in the middle of the handling scale: too heavy to swing by hand, small enough to move with the gear most workshops already run. The figures describe the unit as it is supplied, and they shape the route from the unloading point to the machine.

Dimensions and Moving Plan

The compact envelope reaches the machine on a pallet or in a case, and the openings it has to pass are measured in advance: doorway widths, lift capacity and the standing room in front of the machine. A hoist or engine crane rated for the 90 kg of the 1616727581 cubre el elevador, y el sistema de eslingas mantiene la carga nivelada durante todo el traslado.

El cojinete se sostiene por sus caras de montaje y nunca por su eje. Las tapas de los extremos permanecen en su sitio hasta el momento de la instalación, de modo que nada entra en contacto con el orificio mientras la unidad está al descubierto.

La puesta en marcha y la primera carrera

Before the machine is closed up, the mounting faces are cleaned and checked for burrs, the drive layout is inspected, and alignment and direction of rotation are confirmed. Once running, the machine is brought up unloaded and watched while the readings settle.

Durante el primer periodo de funcionamiento se registran la temperatura de descarga, la presión y las vibraciones, y se vuelve a apretar los elementos de fijación tras las primeras horas. Ese breve registro se convierte en la referencia para todas las comprobaciones posteriores del 1616727581.

Signos de desgaste y periodicidad de renovación

Renovación de la 1616727581 Se decide en función de las condiciones, más que de un recuento fijo de horas. Hay dos líneas de datos que sustentan en gran medida esa decisión, y ambas se interpretan mejor como tendencias observadas a intervalos fijos, más que como cifras aisladas.

Posibles señales de alerta

The rotor coating is what changes first. As it wears, the running gap opens and the low-pressure stage delivers less air at the same shaft power, so a falling free air delivery measured at the rated pressure is the reading that follows that change. Discharge temperature at a steady load moves with it.

Hay otras tres lecturas que recogen la misma historia:

• Mayor consumo de energía por cada unidad de aire suministrada a carga constante, lo que distingue a un 1616727581 de una máquina cuya demanda ha cambiado.
• Vibración en los alojamientos de los cojinetes, medida a intervalos fijos para que el nivel refleje una tendencia en lugar de un valor aislado.
• Noise around the stage, which moves with bearing condition and is worth recording alongside the vibration figures.

Momento adecuado para la renovación

Left unchecked, bearing fatigue can end with the rotors touching, and at that point the stage is written off rather than renewed. A planned renewal avoids that outcome, because the unit is changed while the frame, the drive and the pipework are still in good order.

The unit number recorded in the machine file is what makes that timing judgement easier, since it ties the readings to a known stage rather than to a model in general.

Ordering the 1616727581 Through Seadweer

Two pieces of information lock the order down: the number on the stage being renewed, which reads 1616727581 or 1616 7275 81 in the printed form, and the model and serial number from the compressor nameplate. The nameplate also settles which build the machine carries, which decides the ordering route.

Machine Record Check

Envía ambos a Seadweer y el departamento de repuestos comprobará el número con el registro de la máquina y confirmará el 1616727581 in one pass, together with the ordering reference for the build. Where the number on the old stage has worn away, the nameplate is enough on its own, because the parts list for the machine names the stage it was built with.

Plants that run several compressors keep a short record for each machine: model, serial number, build and stage number. That record turns the next enquiry into a single message with a confirmed answer, and it is the same record the parts desk works from when the 1616727581 se cita.

Lo que confirma la cita

La cotización repite los datos del artículo del 1616727581: the LP-T3 designation, the packed size, the weight, the country of origin and the tariff code, together with the ordering route for the build. One confirmation covers the whole renewal, so the workshop plans the lift and the stop without a second enquiry for the same stage.

Envía los datos de la máquina junto con la consulta y recibirás la respuesta con la compatibilidad ya comprobada. Ese es todo el proceso de pedido para un 1616727581 renovación.

Especificaciones técnicas

En las tablas siguientes se recogen los datos de identificación y las características físicas registradas para el 1616727581.

Identificación de piezas

Número de artículo	1616727581
Denominación	ELEMENT LP-T3
Formulario impreso	1616 7275 81
Tipo de compresión	Compresor de tornillo sin aceite
Stage position	Low pressure (first stage)
Ordering kit, ZR/ZT 30–55 VSD	1837035000
Ordering code, VSD+ and FLX	8153349455
Publicado por entregas	Sí

Dimensiones y peso

Dimensiones (largo × ancho × alto)	45 × 45 × 52 cm
Peso	90 kg
País de origen	Bélgica
Código arancelario	8414900090

The 90 kg weight and the 45 × 45 × 52 cm envelope describe the 1616727581 tal y como se suministra, y establecen el plan de gestión para el día de la instalación. Seadweer confirma los detalles actuales del paquete junto con el presupuesto.

Preguntas frecuentes

What is the 1616727581?

El 1616727581 is the ELEMENT LP-T3, the low-pressure oil-free screw element for the ZR and ZT 30–55 VSD compressors and the VSD+ and FLX builds of the same range. It is a complete factory assembly renewed as a unit rather than rebuilt in place.

Which compressors take the 1616727581?

The ZR and ZT 30–55 VSD machines take it as the low-pressure element, and the VSD+ and FLX builds of the same model range use the same stage through their own ordering code.

What is the difference between kit 1837035000 and DT 8153349455?

They are the two ordering routes for the same stage. Kit 1837035000 is the route for the ZR/ZT 30–55 VSD builds, and DT 8153349455 is the route for the VSD+ and FLX builds. The 1616727581 sits behind both.

Where does the LP-T3 sit in the machine?

It is the low-pressure stage, the first compression step of a two-stage oil-free package. The high-pressure position draws a different element under its own number, and the parts list for the machine names each one.

How heavy is the 1616727581?

The item data lists 90 kg in a 45 × 45 × 52 cm package, so the move is planned with lifting gear rated for that mass. The 1616727581 se apoya en sus caras de montaje y nunca en su eje.

¿Cómo puedo solicitar la renovación de mi compresor?

Read the number on the stage being renewed and note the model and serial number from the compressor nameplate. Send both to Seadweer and the fitment and the ordering route are confirmed against the parts list for that machine before the order is placed.

Más listas de piezas de Atlas Copco

If you need other Atlas Copco air compressor parts, we provide more models in the table below. Please check it or contact us for details.

Número de referencia	Nombre de la pieza	Número de referencia
1616727181	ELEMENT HP T2	1616-7271-81
1616728190	O.I.S. K-36	1616-7281-90
1616725794	OIS S2	1616-7257-94
1616725791	OIS-N-02 SERVICE ELEMENT	1616-7257-91
1616725790	OIS-N-01 SERVICE ELEMENT	1616-7257-90
1635452300	BRACKET	1635-4523-00
2252283500	PANEL	2252-2835-00
1621505334	PULLEY	1621-5053-34
1624641446	PIPE GREEN 10MM2	1624-6414-46
1623811783	MOTOR	1623-8117-83
1515439100	ARANDELA	1515-4391-00
1901008427	Belt	1901-0084-27
2202738710	PANEL FRONT A 9-10 9002	2202-7387-10
2204158916	PANEL FRONT TRAFO C55DD 7021	2204-1589-16
3002601631	FILTER MATS (TYPE P300)	3002-6016-31
1092000019	INLET BAFFLE ASSEMBLY	1092-0000-19
1092000235	0OTOR SERVICE KIT FOR SCD110K	1092-0002-35
2204007558	FILTER ELEMENT-P-130-20CN3UM	2204-0075-58
1621496200	FRAME	1621-4962-00
1631041241	ROOF ASS’Y DRYER C90	1631-0412-41
1614959284	DOOR	1614-9592-84
1650110192	CORE COMPRESSOR	1650-1101-92
2900251200	SKN20/16	2900-2512-00
2205615426	VESSEL	2205-6154-26
1650110298	CORE COMPRESSOR	1650-1102-98
1635506208	FAN RADIAL	1635-5062-08
1310179500	PLATE-DOOR	1310-1795-00
1202214300	WORMWHEEL	1202-2143-00
2205677777	OIL – STANDARD – 209L-RED	2205-6777-77
2107527479	FILTER AIR JUNAIR	2107-5274-79
1630700508	KIT VALVE MINIMUM  G25F	1630-7005-08
1624447200	TUBO	1624-4472-00
1629102480	PIPEWORK	1629-1024-80
1089961176	CHOKE	1089-9611-76
1627226500	TUBO	1627-2265-00
2230008591	ENERGY RECOVERY S1 C	2230-0085-91
1504220028	FILTER AIR	1504-2200-28
1625162504	INLET HOSE	1625-1625-04
1092163050	BAFFLE	1092-1630-50
1614087600	HOSE 8 X 480 X 8	1614-0876-00
1901061488	FLEXIBLE 1 N2 LG 1700	1901-0614-88
1635370100	REJILLA	1635-3701-00
2205490700	SMART/LU5-15 2KH SERVICE KIT	2205-4907-00
1088151213	INSERTAR	1088-1512-13
1901612299	PISTON ROD D50MM	1901-6122-99
1614933400	GEAR WHEEL	1614-9334-00
1649959407	BAFFLE ROOF WITH EARTH STUD	1649-9594-07
2900015200	HOSE	2900-0152-00
1625167906	FOAM AREA	1625-1679-06
1900221385	CUBICLE	1900-2213-85